Genuine 5.5" 2560x1440 Light Curing Display for LCD 3D Printers, covered with tempered glass
The screen is a special SHARP screen for the EPAX X1 and X1-N 3D printer ONLY. Using this screen with any other similar LCD printers is not supported.
Since day one, all our 5.5 LCD screens have both SX04(internal default) and SX03 interfaces. The SX04 to SX03 converter is covered/hidden by black tape. To use the screen on EPAX X1-N printers, you will need to carefully remove the black tape on screen's cable to expose SX04 interface.
The screen has tempered glass installed on top. So even if you spill resin or have a small resin leak, you can gently remove the resin without damaging the screen. Do not leak resin under the screen through edges. It is strongly recommended that you cover the edges with our pre-cut screen tape or with 0.1mm thick kapton tape, if needed.
LCD Screen Specifications
- Size: 5.5" diagonal
- Resolution: 2560x1440
- Pixel precision: 47.25um
- Display area: 68.04x120.96mm
- Appearance size: 70.94x128.49x1.45mm
- Ratio: 9:16
- Weight: 25.0g
- Interface: MIPI (SX03); MIPI (SX04) inside black tape of the cable
EPAX X1 and X1-DJ use MIPI (SX03) interface.
EPAX X1-N and X1-N-DJ use MIPI (SX04) interface. X1-N and X1-N-DJ have a side window on metal body. You just need to open the window while replacing LCD screen. No need to open bottom panel any more.
Make sure correct interface is used for your printer.
Drive Board Specifications
- HDMI to MIPI
- USB 5V power supply, supporting 2K resolution
- Supports PC and Raspberry Pi
- 1x 5.5" LCD screen
- one pre-cut screen tape
For instructions showing you how to replace the screen of your X1, please see this video: https://youtu.be/_R3TH6wx3Cw
After replacing your screen, it is crucial that you also re-level your build platform.
LCD screens are consumed in this printing technology. As a result they are not covered by a warranty. Many screen failures are due to tiny residues in your resin vat between prints. The residues are pressed into the screen and lead to heated stress spots that cause the LCD crystal to burn out. Other times the residues can be large enough to crack the screen. Overly high exposure time settings over time will also decrease screen lifespans.
We guarantee that your screen will work upon arrival and following installation.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
Please carefully read and be sure you understand the following before purchasing a printer:
Our printers have a 1-year warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us.
For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items.