DX10 Parts

LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model
LCD Screens with cables, Choose Model

LCD Screens with cables, Choose Model

Regular price $359.00
/
Shipping calculated at checkout.

Monochrome LCD screen for the EPAX E10-5K/X10-5K/DX10 or DX1 Printer.  Please choose the right model.

E10-5K/X10-5K/DX10 all use the same 10.1" 5K mono screen.

DX1 uses 6.6" 4K mono screen.

X1K/E6 uses 6" 2K mono screen.

X1-4K uses 5.5" 4K mono screen.

X10-4K/E10 uses 8.9" 4K mono screen.

X10 uses 10.1" 2K color screen.

X1/X1-DJ uses 5.5" 2K color screen with SX03 interface.  If you are unsure, please email to support@epax3d.com to help you find out which interface yours is.

X1-N/X1-N-DJ uses 5.5" 2K color screen with SX04 interface.  If you are unsure, please email to support@epax3d.com to help you find out which interface yours is.

X133 uses 13.3" 4K mono screen.

X156 uses 15.6" 4K color screen. 


     Includes:

    • LCD screen
    • screen cable
    • 1x precut tape (to be applied around the screen after installation)


     

    ALWAYS make sure your vat is free from any debris and that the build plate has nothing on it before starting a new print job.  Monochrome screens are more expensive due to being produced in smaller volumes only for 3D printing.

    Using this screen with non EPAX 3D printers is NOT supported.

    Replacing your screen always involved re-leveling your build plate.

    You can reference below general guide for screen replacement too:

    https://epax3d.com/blogs/news/quick-guide-for-upgrade-from-x10-10-1-2k-color-to-x10-8-9-4k-mono

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    Please carefully read and be sure you understand the following before purchasing a printer:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

     

    Returns and Refunds

    If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

    Cart
    EPAX X10/DX10  Magnetic Build Plate
    EPAX X10/DX10  Magnetic Build Plate
    EPAX X10/DX10  Magnetic Build Plate
    EPAX X10/DX10  Magnetic Build Plate

    EPAX X10/DX10 Magnetic Build Plate

    Regular price $55.00
    /
    Shipping calculated at checkout.

     

    This magnetic build plate is compatible to X10/DX10 printers.  It is glued to existing build platform of X10/DX10 printers.  Does not come with build platform itself.

    You can choose magnetic pad+steel plate, or just steel plate.

    This magnetic build plate comes ready to install it to your build platform quickly. After applying the magnetic pad and steel plate onto your existing build platform, you must recalibrate your build platform because of different height now.   Failure to relevel/recalibrate your build platform could result in damage to other parts such as LCD screen. 

    It is calibrated in the same way as the standard build platform.  See the video below as a reference:

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    Please carefully read and be sure you understand the following before purchasing a printer:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

     

    Returns and Refunds

    If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

    Cart
    EPAX DX10/DX1 Pre-cut Tape, Choose Size

    EPAX DX10/DX1 Pre-cut Tape, Choose Size

    Regular price $4.99
    /
    Shipping calculated at checkout.


    This tape should be installed on top of your LCD screen to help protect your printer from resin spills as well as hold your LCD screen in place. It will prevent any leaked resin from dripping underneath your screen and potentially damaging your printer. It will also hold your screen in place if you have to lay your printer down to perform maintenance, etc.


    This is the screen tape ONLY. Replacement LCD screens must be purchased separately.

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    Please carefully read and be sure you understand the following before purchasing a printer:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

     

    Returns and Refunds

    If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

    Cart
    EPAX DX10 Angled Build Platform with Magnetic Build Plate
    EPAX DX10 Angled Build Platform with Magnetic Build Plate
    EPAX DX10 Angled Build Platform with Magnetic Build Plate
    EPAX DX10 Angled Build Platform with Magnetic Build Plate
    EPAX DX10 Angled Build Platform with Magnetic Build Plate

    EPAX DX10 Angled Build Platform with Magnetic Build Plate

    Regular price $249.00
    /
    Shipping calculated at checkout.


    This build platform is only compatible to DX10 printers.

    It has magnetic pad pre-installed, as well as a steel plate.

    If you just want magnetic pad+steel plate, or just steel plate, please choose the right option below.

    Angled DX10 Build Platform Benefits

    Using this build platform will minimize resin accumulation on the stop of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.

     

    This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as the standard flat build plate. See the video below:

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    Please carefully read and be sure you understand the following before purchasing a printer:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

     

    Returns and Refunds

    If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

    Cart
    EPAX DX10 Aluminum Resin Tank with nFEP Film Installed

    EPAX DX10 Aluminum Resin Tank with nFEP Film Installed

    Regular price $249.00
    /
    Only 5 left!
    Shipping calculated at checkout.

    Our resin vats are made entirely of durable, machine-anodized aluminum. This vat will fit and only fit EPAX DX10 3D printers. Each vat comes with a sheet of nFEP film already installed, so it will arrive ready to use. 

    It has heating wire attached.

    Features

    • The completely metal resin tank will not be harmed by resin nor the curing process. 
    • It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
    • The groove in the front right corner makes draining residual resin easy and fast.
    • Hash-marks on the back edge of the vat indicate resin levels.
    • Max Volume of 1250mL without build platform and 900mL with build platform.

     

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    Please carefully read and be sure you understand the following before purchasing a printer:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

     

    Returns and Refunds

    If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

    Cart