EPAX X1-N UV LCD Resin 3D Printer with 3.5 inch Touch Screen, no resin
X1 now has new ChiTu mainboard equipped (Model X1-N), which uses much more efficient CTB format and has grayscale AA. It also uses SX04 LCD screen interface. Since day one, all our 5.5 LCD screens have both SX04(internal default) and SX03 interfaces. The SX04 to SX03 converter is covered/hidden by black tape. So all screens are compatible. The new X1 model is named as X1-N. To use the screen on X1-N, you will need to carefully remove the black tape on screen's cable to expose SX04 interface.
* Resin NOT included, must be purchased separately.
EPAX X1 3D PRINTER FEATURES:
3.5-inch Color TFT Touchscreen.
2K (5.5 inch) LCD masking screen. 2560*1440 (2k) HD masking LCD capable of capturing very fine detail.
Improved Z axis stability.
40W High Energy 50 LED light source.
Pre-installed non-FEP film (Imported from Japan) to allow easier detachment. FEP film can be used as well but the specially formulated nFEP is superior.
Sanded build platform surface made with premium soft aluminum for better adhesion than cheaper, hard aluminum.
Anti-Aliasing supported and enabled in installed firmware.
Wide selection of resin options; can use any 405nm wavelength 3D printing resin.
115mm (L) *65mm (W) *155mm (H) build volume
XY resolution reaches 0.047mm; Minimal Z layer height is 0.01mm
Each printer purchase includes:
1x spare Non-FEP film, 0.125mm thick
1x USB stick loaded with manual PDF file, a sample print file and a ChiTuBox config file
1x power adapter
1x plastic scraper tool
1x metal scraper tool
1x allen wrench
2x resin filters
ADVANTAGES OVER SIMILAR PRINTERS: - No Z-Wobble - The EPAX X1 has an upgraded Z-axis carriage rail. It uses a double steel rod reinforced carriage and steel bearings. No calibration is required. It runs perfectly out of the box. - Non-FEP Film for Resin Vat - Reduces print adhesion between print and film. Better air permeability than FEP films. Our high-quality non-FEP film can be used on LCD, DLP and SLA printers! Standard FEP film is compatible with our printers as well. - Better Light Source - EPAX uses 50W rated 5x10 LED array light source and can last longer than others. Unlike others which use weak 25W light source. We tuned it down to 40W to extend the lifespan of the LCD masking screen. - Ultra-Precise Fixed Build Platform - The EPAX X1 uses a 4-point mount that is rock solid and will be leveled out of the box. It will rarely require a re-level. - Better Chassis Design - The EPAX is built like a tank using an all-steel chassis with minimal windows. Windows on a UV resin printer are NOT helpful and allow outside UV light sources to potentially penetrate the build chamber and affect your prints. - Precise Z-Homing - Perfectly calibrated out-of-box. All printers are individually calibrated at factory. - Better Door Hinge Design - EPAX can sit against a wall because its door is hinged on top of the machine. - Various Resin Options: eSUN resins are supported and tested heavily with our printers. eSUN is committed to being the most advanced and prolific resin manufacturer today. Resins available now include: Standard, Hard and Tough Resin, PLA Bio-Resin, Castable Resin for Dental and Castable Resin for Jewelry. Any 405nm wavelength UV resin can be used with our printers.
CUSTOMER SERVICE - When we say great customer service we mean it. Responses to your e-mail inquiries should be sent within hours. Customer satisfaction is our No. 1 priority.
Note: For orthodontists who print models for aligners or inbound trays, etc., the standard X1 is sufficient and you do not require the DJ model. 3D printing requires good understanding of hardware and some software skills for maintenance and tuning settings. We can refer great online or in-person training to ortho office staffs.
Take a look at some videos to help understand how the machine works:
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
Please carefully read and be sure you understand the following before purchasing a printer:
Our printers have a 1-year warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us.
For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items.