X133 and X156 Printers
E10 Printer and Parts
E6 Printer and Parts
This a 13.3" monochrome LCD screen for the EPAX X133 printer. With an appropriate mounting bracket it can also be installed in an EPAX X156 printer. Using this screen with similar LCD printers is not supported.
You should be careful not to let resin leak under the screen around the edges and should apply black tape (or 0.1mm kapton tape) around all four edges.
When you remove/replace surrounding tape, please remove it very slowly since the tape on north side also covers the LCD screen's PCB board and internal cable.
LCD Screen Specifications
LCD screens are consumed in this 3D printing technology so screens are not covered by the warranty. A lot of failed screens are due to tiny residues in the resin vat being pressed into the screen. Unnecessarily high exposure time settings can also shorten the life of a screen. We guarantee that your screen will work upon arrival and following installation.
ALWAYS make sure your vat has NO residues and that your build plate has nothing on it before starting a new print job. Monochrome screens have a higher cost due to their smaller inventory and being used for 3D printing only. But if your screen is properly cared for, it should last a very long time.
Replacing your screen always involved re-leveling your build plate.