EPAX X1 UV LCD Resin 3D Printer with 3.5 inch Touch Screen, Build Volume 115mm (L)65mm (W)155mm (H), no resin included
Brand: EPAX 3D
Product Code: EPAX-X1-55LCD-Printer
- 3.5-inch Color TFT Touch Screen.
- 2K (5.5 inch) LCD masking screen. 2560*1440 (2k) HD masking LCD gives very fine printing details.
- Improved Z axis stability. 40W High Energy 50 LED light source.
- Pre-installed non-FEP film (Imported from Japan) to allow easier detachment. Several times more expensive and much better than FEP film. You can use FEP films with this printer too.
- Sanded Build Platform Surface made with expensive soft aluminum, unlike others using cheap hard aluminum.
- Anti-Aliasing supported and enabled in installed firmware!
- Wide selection of resins. Support 405nm wavelength 3D printing resins
- 115mm (L) *65mm (W) *155mm (H) build volume
- XY resolution reaches 0.047mm; Minimal Z layer height is 0.01mm
- 1 spare Non-FEP film 0.125mm thick
Advantages over other similar printers:
No Z-Wobble - Upgraded Z-axis carriage rail. It uses a double steel rod reinforced carriage and steel bearings. No calibration required runs perfectly out of the box.
Non-FEP Film for Resin Vat - Reduces print adhesion between print and film. Better air permeability than FEP films. Our high-quality non-FEP film can be used on LCD, DLP and SLA printers! You can use FEP films if you want.
Better Light Source - EPAX uses 50W rated 5x10 LED array light source and can last longer than others. Unlike others which use weak 25W light source. We tuned it down to 40W so that we can ensure an extended life of LCD mask screen.
Ultra-Precise Fixed Build Platform - Calibrated to perfection right out of the factory. The EPAX uses a 4 point mount that is rock solid and was already calibrated perfectly out of the box.
Better Chassis Design - The EPAX is built like a tank with an all-steel chassis with minimal window. Windows on a UV resin printer are NOT helpful. Just more opportunity for outside sources of UV light to mess things up. Strong engineer team. 10.1 inch and 13.3 inch are available soon.
Smell - Resins are known to have a strong smell. But ESUN produces not only high-quality resins, but also less odor/smell and less toxic resins than other manufacturers. ESUN made PLA based resin available now.
Precise Z Homing - Perfectly calibrated out-of-box. Each and all printers were individually calibrated at factory!
Better Door Hinge Design - EPAX can sit against a wall because it's hinged on top of the machine.
Various Options of Resins: ESUN resins are supported and tested heavily. ESUN is committed to being the most advanced and prolific resin manufacturer. Resins available now: General Hard Resin, PLA bio-Resin, Castable Resin for Dental and Castable Resin for Jewelry...... You can also use other LCD resins. The printer is compatible to many 405nm wavelength LCD resins.
CUSTOMER SERVICE - When we say great customer service we mean it. Responses to your e-mail inquiries should be sent within hours. Customer satisfaction is our No. 1 priority.
Backed by our outstanding customer support.
1x extra non-FEP film
1x USB stick loaded with manual PDF file, a sample print file and a ChiTuBox config file.
1x power adapter
2x resin filters
DOES NOT come with resin.
1 year USA warranty for the printer, except that no warranty on consumables such as LCD screen, film, funnel filter and accessories.
International orders. Warranty is not possible internationally. We test all units carefully before shipping out. You may return during the first 30 days but you will need to be responsible for all shipping costs.