EPAX 8.9" 4K Mono LCD Screen with cable, for X10 and E10 mono printers
This is the monochrome LCD screen for the EPAX X10 and E10 3D printers which are using 8.9" 4K mono screen.
We are currently only offering the E10's mono screen as it is compatible with the X10 printer. Both E10 and X10 use the same mainboard and the same screen interfaces so the E10's 4K mono screen can be used with the X10 with just a quick firmware update.
LCD Screen Specifications
- Size: 8.9" diagonal
- Resolution: 3840 x 2160
- Pixel precision: about 47um
- 1x 8.9" 4k monochrome LCD screen
- screen cable
- 1x precut tape (to be applied around the screen after installation)
- Monochrome LCD screens last much longer than color screens (with proper use your screen should last several thousand hours). This screen has tempered glass installed on top. So even if you spill resin on top of it you can gently shovel it off without damaging the screen.
- 4k screen resolution at 8.9" size
- Very short layer exposure times are needed (up to 1/4th of the time needed for color LCD screens)
Do not leak resin under the screen through edges. Cover edges with 0.1mm thick kapton tape or reinforced electric tape or precut tape. A lot of failed screens are due to tiny residues in the resin vat between prints. The residues get pushed into the screen by the build platform, leading to heated stress spots and sometimes even cracks in the screen. Some failures are also due to unnecessary over exposure time settings. Because screens are considered consumables they are not covered by a warranty. We do guarantee that your screen will work at arrival.
ALWAYS make sure your vat NO any residues and that the build plate has nothing on it before starting a new print job. Monochrome screens are more expensive due to being produced in smaller volumes only for 3D printing.
Using this screen with other similar 3D printers is NOT supported.
Replacing your screen always involved re-leveling your build plate.
You can reference below guide for screen replacement too:
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
Please carefully read and be sure you understand the following before purchasing a printer:
Our printers have a 1-year warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us.
For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items.