all products

X1 aluminum build platform
EPAX X1 replacement build plate
EPAX X1 Series Build Platform  -- choose your model

EPAX X1 Series Build Platform -- choose your model

Regular price $79.00
/
Only 5 left!
Shipping calculated at checkout.

Our soft aluminum EPAX X1 build plates allow for both optimal bottom layer adhesion as well as print removal. They have a gently sanded surface and are constructed to be stable, secure and seldom require re-leveling.

This build platform has all the parts/screws necessary to install it right away.  

If you choose a "Slightly Scratched" build platform you may see some signs of use when your platform arrives. They were likely scratched during factory testing. These scratches will not affect print adhesion or printing in any way. Scratches are actually known to improve adhesion and platforms inevitably become scratches over time.

Works with all EPAX X1 series printers of 5.5" and 6" screens.  For X1-4KS printer, which uses 6.6" screen, please choose its model.

NOTE: Before using your new build platform, be sure to calibrate it for your EPAX 3D printer. 

See the video below for how to level or re-level your build plate:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)
EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)
EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)

EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)

Regular price $55.00 Sale price $25.99
/
Shipping calculated at checkout.

This magnetic pad and steel plate are compatible with the E10 Version 2 All-Metal Rounded build plate or the original Molded build plate pictured below. It is attached to the existing build platform using an adhesive magnetic pad. This item does not come with the build platform itself. Not recommended for dental use.

 

This DOES NOT FIT the Angled Build Platform pictured below.

You can choose the magnetic pad+steel plate or the steel plate by itself.

Two options to choose from:

1, Magnetic pad and Steel Plate

2, Steel Plate Only

Steps to apply:

1, Clean your existing Metal Build Platform well.  Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.

2, Glue magnetic pad to the existing build platform.  The pad comes with glue pre-applied.

3, Put the steel plate on.

4, Re-level the new whole Build Platform similar to before.

Size: 9.12" x 5.56" (231mm x 141mm)

Caution:

You can use IPA to clean steel plate and magnetic pad surface.  But not to soak the magnetic pad into IPA.  Doing that will lead to the separate of the pad from build platform since IPA can dissolve the glue. 

If you just want magnetic pad+steel plate, or just steel plate, please choose the right option below.  Note that these magnetic pad and steel plate are only compatible with E10/E10-5K LCD resin printer.  It fits well to the E10 series Molded Build Platform.

NOTE: Before printing with new build surface, be sure to calibrate it for your EPAX 3D printer. 

See the video below for how to level or re-level your build plate:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 1 review Write a review
Cart
nFEP nonFEP film for EPAX X133 LCD 3D resin printer

EPAX X133 nFEP Premium Film (1 film)

Regular price $39.00
/
Shipping calculated at checkout.


Our Non-FEP (nFEP) films are a special blend of Teflon material, superior to standard FEP films and ideal for large-format printers when you will truly be able to recognize the benefits.

Dimension: 380mm x 260mm  (15" x 10.2")

This package of film includes ONE (1) piece of nFEP film sized for the EPAX X133 13.3" LCD 3D printer with 0.125mm thickness.

  • nFEP is excellent quality: resistant to high temperatures (up to 260° C), chemically resistant, UV stable and providing the ultimate non-stick surface
  • It is perfectly smooth - smoother than FEP films - with optimal air permeability, which leads to less vacuum suction force for fewer failed prints due to layers sticking to the film
  • Each package is shipped in thoughtful protective packaging.

 

How to Replace nFep Film

Films are Made in Japan, Cut and Packed in China

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX Water-Washable Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Water-Washable Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Water-Washable Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm

EPAX Water-Washable Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm

Regular price $89.99 Sale price $79.99
/
Shipping calculated at checkout.
* We cannot ship resins internationally at this time. *


EPAX Water Washable Dental Model Resin for Orthodontics provides very minimal amount of shrinkage in a 3D printing resin. It is the recommended resin for dental and orthodontic applications.


With a shrinkage rate only around 2% it is capable of capturing a very high level of detail, making this resin ideal for the accurate modeling of teeth and gums for the production of retainers, night guards, and more. 


EPAX Water Washable Dental Resin is water-soluble and can be cleaned up using room temperature tap water instead of isopropyl alcohol. It is low-odor in addition to avoiding the odor associated with IPA used in the clean-up of standard resins. This resin allows for faster printing speeds than most general purpose resins without sacrificing print quality.





Color: Beige






Recommended Settings for EPAX Printers using Color Screen:

  • Normal Exposure Time: 8 seconds
  • Bottom Exposure Time: 50 to 60 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 60mm/s
  • Retraction Speed: 150mm/s
Recommended Settings for EPAX Printers using Mono Screen:

  • Normal Exposure Time: 2 to 2.5 seconds
  • Bottom Exposure Time: 25 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 60mm/s
  • Retraction Speed: 150mm/s

 


Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)

EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)

Regular price $55.00 Sale price $12.99
/
Shipping calculated at checkout.

 

This magnetic pad and steel plate are compatible with the X10 or E10 all-metal ANGLED build plate pictured below. It is attached to the existing build platform using an adhesive magnetic pad. This item does not come with the build platform itself. Not recommended for dental use.


 

This DOES NOT FIT the E10's standard Molded Platform or the rounded version 2 All-metal build plate pictured below.

 

 

 

You can choose the magnetic pad+steel plate or the steel plate by itself.

Two options to choose from:

1, Magnetic pad and Steel Plate

2, Steel Plate Only

Steps to apply:

1, Clean your existing Metal Build Platform well.  Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.

2, Glue magnetic pad to the existing build platform.  The pad comes with glue pre-applied.

3, Put the steel plate on.

4, Re-level the new whole Build Platform similar to before.

Size: 9.12" x 5.625" (231mm x 143mm) 

Caution:

You can use IPA to clean the steel plate and magnetic pad surface.  But not to soak the magnetic pad in IPA.  Doing so will lead to the separation of the pad from the build platform since IPA can dissolve the glue. 

 

This magnetic build plate comes ready to install on your build platform quickly. After applying the magnetic pad and steel plate to your existing build platform, you must relevel your build platform because of the increased height of the build surface. Failure to relevel/recalibrate your build platform could result in damage to other parts such as the LCD screen. 

It is calibrated in the same way as the standard build platform.  See the video below as a reference:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX X10 build platform upgrade angled build plate
EPAX X10 Angled Build Platform
EPAX X10 beveled build platform
EPAX X10 beveled angled tapered build plate

EPAX X10 Angled Build Platform

Regular price $139.00
/
Shipping calculated at checkout.

This is an alternate, optional build platform for the EPAX X10 3D printer. It is made from soft aluminum with a sanded surface for the best adhesion and print removal, and it is constructed to be stable for minimal re-leveling.

This build platform is only compatible with X10 printers, it is not compatible with E10 printers.  E10 requires a different top bracket.

Angled X10 Build Platform Benefits

Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.

 

This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as the standard flat build plate.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
z-axis motor and lead screw for EPAX X1 3D LCD resin printer replacement

Z-Axis Motor & Lead Screw - Choose Your Model

Regular price $59.00
/
Only 2 left!
Shipping calculated at checkout.

This is a replacement Z-axis motor and lead screw for EPAX LCD resin printers. The X156 motor does not come with a lead screw.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 1 review Write a review
Cart
EPAX X10 3D Resin printer spare or replacement resin vat with nFEP film installed

EPAX X10 Aluminum Resin Tank with nFEP Film Installed

Regular price $179.00
/
Shipping calculated at checkout.

Our resin vats are made entirely of durable, machine-anodized aluminum. This vat will fit EPAX X10 3D printers (except the latest X10-8KW, which uses a wider vat). Each vat comes with a sheet of nFEP film already installed, so it will arrive ready to use. 

Features

  • The completely metal resin tank will not be harmed by resin nor the curing process. 
  • It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
  • The groove in the front right corner makes draining residual resin easy and fast.
  • Hash-marks on the back edge of the vat indicate resin levels.
  • Max Volume of 1250mL without build platform and 900mL with build platform.

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX High Temperature Resin, UV 405nm 1KG

EPAX High Temperature Resin, UV 405nm 1KG

Regular price $74.99 Sale price $68.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

EPAX High Temperature Resin was specially formulated for EPAX printers.

EPAX High temperature Resin is suitable for printing detailed, precise parts for use in high temperature applications. High temperature resin offers unparalleled thermal deflection for prints that require exceptional heat management without deformation.  

Can withstand a high temperature as high as 220 Celsius.  

  

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
(Refurbished) EPAX E10 Series Mono LCD 3D Printer
(Refurbished) EPAX E10 Series Mono LCD 3D Printer
(Refurbished) EPAX E10 Series Mono LCD 3D Printer

(Refurbished) EPAX E10 Series Mono LCD 3D Printer

Regular price $499.00 Sale price $229.00
/
Only 3 left!
Shipping calculated at checkout.



This is a USED EPAX E10 printer in good working condition. The exact condition of the printer will vary. Sometimes a refurbished printer will have minor cosmetic damage (such as a dent or scratch on the frame or scuffs). Some will have some signs of use (such as minor scratches on the build plate or vat), but nothing that will impact printing.

Build plate/arm and vat are molded plastic parts.

The printer will be in good working condition and is tested before shipping out. Your printer will arrive calibrated and ready to print.

We do not ship refurbished printers internationally. They are only available for domestic US customers.  

This EPAX E10 is a mid-sized printer, with either 8.9" 4K, 10.1" 5K or 8K mono screen loaded. Monochrome LCD screens allow for much faster exposure settings and have a much longer lifespan than color LCD screens.

The E10 has same printing volume height as X10 at 250mm.

Features of the E10 3D LCD Printer:

  • High quality dual-linear rails and lead screw
  • Unique nFEP film leading to small release force and less stress on print
  • High quality latest parallel light
  • Versatile screen options.  Can be loaded with 8.9" 4K, 10.1" 5K or 8K screen (Compatible 5K/8K mainboard needed).  
  • Modular design.  Making upgrades easier.  Non-customized ChiTu mainboard thus making future upgrades easy.  
  • Molded vat costs much less, making it easy to own many.  The molded vat is corrosion resistant.  The vat comes with an installed film and is just a bit over the cost of a film.
  • Partially molded build plate, making it easy to get one spare for your printer.
  • Heavy foundation and frame making it a stable machine.

Available Models:

  • 192mm (L) *120mm (W) *250mm (H) build volume  (10.1" 4K color edition)
  • 221.4mm (L) *129.6mm (W) *250mm (H) build volume  (10.1" 5K mono edition)
  • 218.88mm (L) *123.12mm (W) *250mm (H) build volume  (10.1" 8K mono edition)

The purchase price does not include sales tax/VAT and shipping cost. The shipping cost will vary from country to country and depends on which shipping option chosen.  Customer is responsible for sales tax/VAT of your location.

Accessories included:
1x extra nFEP film
1x USB stick
1x power adapter
1x metal scraper
1x plastic scraper
2x funnels
DOES NOT come with resin. 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
Resin Tank Screws
Resin Tank Screws

Resin Tank Screws

Regular price $5.00
/
Shipping calculated at checkout.

These are the replacement resin vat screws for Epax 3D printers. These screws hold the vat in place during the printing process. Please make sure you select the correct screws for the machine you have.

  • Each pack contains 2 resin tank screws 


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 1 review Write a review
Cart
E10 All Metal Build Arm
E10 All Metal Build Arm

E10 All Metal Build Arm

Regular price $59.00
/
Only 3 left!
Shipping calculated at checkout.

The new E10 all-metal build arm reinforces the printing assembly for a longer lifetime of printing. 

When printing models with a center of mass further from the guide rail, a higher magnitude of stress is exhibited by the build arm. By implementing the all-metal build arm into your printer assembly, less fatigue becomes natural. 

For customers looking to print larger and heavier models, the rigid all-metal build arm features less deflection and deformation. This allows for greater accuracy and consistency in printing success. 


  

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
TFT color touchscreen
3.5" TFT color touchscreen

X1 / E6 / X10 & E10 3.5 Inch Touchscreen

Regular price $39.00
/
Shipping calculated at checkout.

As pictured. This is the touchscreen ONLY. The ribbon cable is not included. 

The 3.5" color TFT touchscreen is compatible with EPAX printer models including X1 series, E6, E10 series and X10 series. It comes covered with a protective film and is ready to install.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
Power Supply - Choose Your Model

Power Supply - Choose Your Model

Regular price $59.00
/
Shipping calculated at checkout.

This is a replacement power supply for your printer. Please choose the correct model first.

Power Supplies for the following printers: 

24V Power Supply --> E10 / X10 / X1-4K / X1-4KS / E6 / X1-K

12V Power Supply --> X1-Classic / X1-N 

X156 and X133

If you order from another country and require a different plug style, you can replace the cord. The cord detaches from the power brick.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart

EPAX E10 10.1" 14KW Mono LCD 3D Printer - New Release

Regular price $999.00 Sale price $699.00
/
Only 4 left!
Shipping calculated at checkout.


Orders will be shipped out in 2 business days

This EPAX E10 is equipped with a 10.1-inch 14K mono LCD screen. This Monochrome LCD screen allows for much faster exposure settings and higher resolution enabling users to print much faster and with greater detail.

XY resolution:  13320 x 5120 with a pixel size of 16.8µm

Model E10-14KW:

  • WiFi connectivity for network printing
  • 5" full color touchscreen
  • 240mm Z axis height
  • Larger high-resolution touchscreen
  • 3.5GB of internal storage
  • File sharing capability
  • Print History capability
  • Made with future upgradeability in mind
  • Ethernet connectivity for network printing
  • A 10.1" 14K mono screen that produces amazingly detailed prints at 16.8µm microns

BUILD VOLUME: 14K build volume of 223.78mm*126.98mm*240mm. The E10 14K utilizes a lensed light source consisting of an ultraviolet LED matrix with a finely tuned lens array. The emitted UV rays are uniformly parallel creating ultra-precise prints.

Works with ChiTuBox Pro version slicers and Free Basic Version. The mainboard and slicer both are supplied by ChiTuBox.  If you use other slicers, such as Lychee, please consult the slicer maker for compatibility. 

**An importable preset for this printer's parameters will be added in the next Chitubox update. Until then, you can make a custom profile for the machine parameters using the settings in the image gallery.**

You can find the download for the software here https://www.chitubox.com/en/index

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX X10 Parallel UV Light Upgrade Kit
EPAX X10 Parallel UV Light Upgrade Kit

EPAX X10 Parallel UV Light Upgrade Kit

Regular price $299.00
/
Shipping calculated at checkout.

This parallel matrix UV light kit has all the parts and screws necessary to change your existing, standard X10 light source to this newer light source that adds more dimensional accuracy and can capture the finer details of your prints- great for dental and jewelry applications.

The latest edition of this light source now functions at a lower energy level - It is tuned to have about same exposure time as the standard light source, but it will help to prolong the lifespan of your LCD screen.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart

Wholesale case -- 10 spools of EPAX Fast PLA+ 3D Printer High Speed Filament, 1.75mm 1KG

Regular price $229.00 Sale price $189.00
/
Shipping calculated at checkout.

This is for a whole case.  Each case contains 10 spools of retail 1kg spool.

High Speed PLA 3D Printing Filament, Dimensional Accuracy +/- 0.03mm

Run as fast as 350mm/s.  Compatible with Bambu AMS system.

Next generation PLA+ with great toughness and layer-adhesion.

Formulated specially for current high speed printers.  Much higher speed while maintaining PLA+ performance.  This filament can easily sustain linear speed at 350mm/s.  Its Max Volumetric Speed is around 30 cubic mm/s.

For customized colors, please email to sales@epax3d.com.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 1 review Write a review
Cart
EPAX X1 mainboard
EPAX X1 3D resin LCD printer motherboard

X1-K / E6 Mainboards

Regular price $129.00
/
Only 2 left!
Shipping calculated at checkout.


X1-K and E6 share the same mainboard but slightly different firmware, because the slightly difference on the 6" mono screen size.  

You will need to check which version X1 you have. X1-Classic X1-N, X1-K, and E6 will all use this mainboard but will use different firmware. The X1 mainboard uses an SX04 interface to the LCD screen and its firmware uses CTB file format to print instead of the CBDDLP file format that the older X1-Classic mainboards used. Because of where the screen cable connector is located, customers replacing the X1-classic mainboards will need to remove the right angle adapter from the end of their screen cable before connecting to the mainboard. FAILURE TO DO SO WILL SHORT OUT THE MAINBOARD AND THE SCREEN.

Please contact support@epax3d.com if you have any questions.


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm

EPAX High Precision Engineering Resin, UV 405nm

Regular price $89.00
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

 EPAX High Precision Resin was specially formulated for EPAX printers.

Color: Black only

No other color options.

EPAX High Precision Resin is suitable for printing detailed, precise parts while minimizing resin expansion and contraction during printing. High precision resin offers unparalleled dimensional accuracy for prints that require low margins of error. 

  

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)
EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)

EPAX Magic Silk PLA 3D Printer Filament Bi-Colors/Tri-Colors, 1.75mm 1KG (2.2LB)

Regular price $27.99 Sale price $25.99
/
Shipping calculated at checkout.

 

EPAX Magic Silk PLA Bi-Colors/Tri-colors

EPAX Magic Silk PLA products are made from Polylactic Acid which is a non-toxic material. Two or three colors will be evenly distributed, positioned at each position of the prints. The print is bright and glossy with a shiny silk finish.

Print Parameter:

No heated bed required.

Printing Temperature:     190 °C - 220 °C

Bed Temperature:               0 °C -  40 °C


For customized colors, please email to sales@epax3d.com.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 1 review Write a review
Cart
Slotted Optical Switch
Slotted Optical Switch
Slotted Optical Switch

Slotted Optical Switch

Regular price $15.00
/
Shipping calculated at checkout.
The Slotted Optical Switch is used to determine the home position of all Epax3D machines. If you are having issues with the build plate rising when you press the home button, your build plate thinking its at the home position when it's not, the red light on the optical switch flickering or not coming on at all, then you may need to replace the Optical Switch.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
Build Plate Knob
Build Plate Knob
Build Plate Knob
Build Plate Knob

Build Plate Knob

Regular price $5.00
/
Shipping calculated at checkout.
This is the replacement build plate knob for Epax 3D printers. Please make sure you select the correct knob for the machine you have.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX X156 Angled Build Platform
EPAX X156 Angled Build Platform
EPAX X156 Angled Build Platform
EPAX X156 Angled Build Platform
EPAX X156 Angled Build Platform

EPAX X156 Angled Build Platform

Regular price $229.00
/
Shipping calculated at checkout.

Build platform for the EPAX X156 3D printer. It is made from soft aluminum with a sanded surface for the best adhesion and print removal, and it is constructed to be stable for minimal re-leveling.

Dimensions: 220mm x 370mm

Angled X156 Build Platform Benefits

Using this build platform will minimize resin accumulation on the stop of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.

 

This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as all other build plates of all printers. See the video below as a reference:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX X156 Aluminum Resin Tank with nFEP Film Installed

EPAX X156 Aluminum Resin Tank with nFEP Film Installed

Regular price $249.00
/
Only 3 left!
Shipping calculated at checkout.

Our resin vats are made entirely of durable, machine-anodized aluminum. This vat will fit EPAX X156 3D printers. Each vat comes with a sheet of nFEP film already installed, so it will arrive ready to use. 

Features

  • Aluminum build means the tank will not be harmed by resin or curing process
  • Equipped with a rubber seal to ensure that vat is water-tight to avoid resin leaks
  • Groove in the front-right corner allows for draining residual resin simple and quick
  • Hash-marks indicate resin levels for the vat.
  • Max volume of 3300mL without build platform and 2300mL with build platform.


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart