Parts & Accessories

Enhance Your Setup

X10 Acrylic Window replacement

Regular price $59.99
/
Shipping calculated at checkout.

This is the orange window to replace a cracked window on the door of the X10 series printers. This is for the X10 ONLY it will not fit an E10 hinged door, X133, or X156.

Dimensions are 323mm x 304mm.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
X156 8K Mono Upgrade Kit
X156 8K Mono Upgrade Kit
X156 8K Mono Upgrade Kit
X156 8K Mono Upgrade Kit
X156 8K Mono Upgrade Kit
X156 8K Mono Upgrade Kit
X156 8K Mono Upgrade Kit

X156 8K Mono Upgrade Kit

Regular price $759.00 Sale price $659.00
/
Shipping calculated at checkout.

 

In stock.  

The EPAX X156 8K Mono upgrade kit includes:

  • X156 8K Mainboard and its mounting bracket
  • 16" 8K Mono LCD Screen, screen cable and screen tape
  • Screen bracket adapter 
  • Large Touch Screen and its mounting frame/bracket

The kit does not require light source change.   However, you will need either a multimeter to measure/adjust voltage settings, or a light intensity meter.  The light output of existing light source needs to be adjusted/lowered so that the right amount of light get through the 16" 8K mono screen.  Follow the below instruction pdf file to adjust the light intensity.  If any questions, please email to support@epax3d.com

Some old X156 may need to drill a few holes to mount the mainboard securely. 

FEATURES:

 

  • 8K high resolution of 7680x4320

  • 353.28mm*198.72mm*400mm build volume

Using this kit on other printers other than X156 is not supported.  You will assume all the responsibility if you install this kit on other printers.

Box Dimensions: 20"x15"x8"  Gross Weight: 12 lbs

Click here for the Installation Instructions PDF file!

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX eSLIP/ACF Composite Film, ONE film, Choose your printer size

EPAX eSLIP/ACF Composite Film, ONE film, Choose your printer size

Regular price $35.00 Sale price $14.00
/
Shipping calculated at checkout.

E10/X10-8K Film Dimension:  290mmx210mm
X1-4KS Film Dimension: 180mmx130mm
  • X10 size fits for all EPAX X10/E10 printers
  • X1-4KS size fits for all EPAX X1 series printers.
  • Excellent slippery surface: enabling faster printing with less release force and less lifting distance.
  • Shipped in protective tube.  
  • Each pack contains one (1) film
  • 0.3mm thickness 

These films are composite films with a coating on one side to ensure great slippery.  Used in LCD, DLP and SLA machines where fast printing is more important than quality/durable parts.

Note:  The sides are directional.  Do not put it upside down.  See instructions on the film.  There is a protective film on the actual eSLIP film.  The protective film needs to be removed.

Difference between nFEP film and eSLIP/ACF film:

nFEP film is more elastic.  As such, it is less likely to be damaged by residues in vat.  It is recommended for all resin 3D printers, especially jewelry/dental applications where details and quality are more important.  nFEP film has great air permeability, which leads to less vacuum suction force.

eSLIP/ACF film is more rigid and slippery.  As such it needs a smaller lifting distance and prints can run faster.  Printers with eSLIP film can have an overall 40% speed gain due to lower lifting distance needed.  You also need to increase your bottom exposure time and normal exposure time by 20% because the film has 20% less light through rate.  It is recommended for all resin 3D printers where faster printing is more important than outstanding details.  However, if you leave residues in vat, the film is a bit easier to get damaged than nFEP film.  The coating, and the 0.3mm thickness, lead to a bit loss of light accuracy.  Fast printing resins, because they flow like water, are also not able to make strong and tough parts.  Parts tend to be more brittle.  As such, we don't offer fast printing resins.  You can use the film with normal resins and it can still speed up somewhat due to lower lifting distance alone.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 1 review Write a review
Cart
X10-8KW Heater
X10-8KW Heater
X10-8KW Heater
X10-8KW Heater

X10-8KW Heater

Regular price $199.00
/
Only 1 left!
Shipping calculated at checkout.

This is an optional digital heater addon for the X10-8KW Printer.  

The Heater mounts on the left side of the build arm and will heat the entire print chamber allowing the resin and build plate to be heated to the set temperature.

This add-on requires a stronger power supply. The power supply that the stock X10-8KW comes with will not work. This add-on requires a power supply that is at least 24V 12.5A.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
E10 All Metal Build Arm
E10 All Metal Build Arm

E10 All Metal Build Arm

Regular price $59.00
/
Only 2 left!
Shipping calculated at checkout.

The new E10 all-metal build arm reinforces the printing assembly for a longer lifetime of printing. 

When printing models with a center of mass further from the guide rail, a higher magnitude of stress is exhibited by the build arm. By implementing the all-metal build arm into your printer assembly, less fatigue becomes natural. 

For customers looking to print larger and heavier models, the rigid all-metal build arm features less deflection and deformation. This allows for greater accuracy and consistency in printing success. 


  

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
TFT color touchscreen
3.5" TFT color touchscreen

X133/X156 4.3" Inch Touchscreen

Regular price $49.00
/
Only 3 left!
Shipping calculated at checkout.

As pictured. This is the touchscreen ONLY. The ribbon cable is not included. 

The 4.3" color TFT touchscreen is compatible with EPAX printer models including X133 series and X156 series printers. It comes covered with a protective film and is ready to install.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX E10/X10 8K Upgrade Kit -- choose your model

EPAX E10/X10 8K Upgrade Kit -- choose your model

Regular price $549.00 Sale price $429.00
/
Only 5 left!
Shipping calculated at checkout.

Please choose the right kit for your printer.  E10 and X10 use different brackets.


The EPAX X10/E10-8K 10.1 inch upgrade kits are made for all E10 and X10 machines with the parallel light source already installed. 

The 8K Upgrade Kit Includes: 

  • 8K Mainboard
  • 10.1" 8K Mono LCD Screen 
  • 10.1'' Screen Tape 
  • Screen Bracket

* You will need double-sided tape in order to install the screen to the bracket

FEATURES:

 

    • 8k high resolution:  7680x 4320 with pixel size 28.5um

    • 8K build volume of 218.88mm*123.12mm*250mm.
 

Installation instructions are available on our YouTube channel through the link below.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
Screen Protector -- choose your screen size from 6" to 16"

Screen Protector -- choose your screen size from 6" to 16"

Regular price $35.00 Sale price $22.00
/
Shipping calculated at checkout.

Epax screen protectors are similar to a cell phone's anti-scratch screen protector but are tailored to work with Epax Printers. Epax screen protectors are a great way to protect your LCD screen from potential damage that may occur if there is a resin spill.

Please make sure you choose the right screen size for your model.

There are protective films on both sides of the screen protector.  When you apply the protector, you need to peel off the film labeled "back" and then apply using the plastic spatula to the screen's surface carefully, starting from one corner. Having some bubbles may be unavoidable but they should not affect your prints.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

No reviews yet Write a review
Cart
Ethernet Extension Cable
Ethernet Extension Cable

Ethernet Extension Cable

Regular price $10.00
/
Shipping calculated at checkout.
The Ethernet extension cable connects from the mainboard inside of the printer to the outer case of the machine.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
USB Extension Cable
USB Extension Cable

USB Extension Cable

Regular price $15.00
/
Only 8 left!
Shipping calculated at checkout.
The USB extension cable connects from the mainboard inside of the printer to the outer case of the machine.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
E10 Molded Hood

E10 Molded Hood

Regular price $69.00
/
Shipping calculated at checkout.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
X133-6K Full Upgrade Kit
X133-6K Full Upgrade Kit
X133-6K Full Upgrade Kit

X133-6K Full Upgrade Kit

Regular price $1,149.00
/
Only 1 left!
Shipping calculated at checkout.

The EPAX X133-6K upgrade kits are made for experienced 3D Printer customers, as the installation process is complex. 

The lensed parallel light will increase dimensional accuracy of your prints. When combined with the 6K resolution LCD screen, you can produce highly detailed products.

The X133-6K Upgrade Kit Includes: 

  • X133-6K Mainboard
  • 13.3" Screen 
  • 13.3'' Screen Tape 
  • Parallel Light Source
  • Power Supply
  • 2 Mounting Brackets

* You will need double-sided tape in order to install the screen to the bracket

FEATURES:

  • 6k high resolution of 5760 x 3240

  • 288mm*162mm*400mm build volume

Installation instructions are available on our YouTube channel through the link below. 


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
X156/X133 Build Plate Top Bracket
X156/X133 Build Plate Top Bracket
X156/X133 Build Plate Top Bracket
X156/X133 Build Plate Top Bracket

X156/X133 Build Plate Top Bracket

Regular price $69.99
/
Only 7 left!
Shipping calculated at checkout.

The new X156 / X133 top bracket allows for a more secure attachment to the build arm as well as improved stability.

 

X156 / X133 Build Plate - NOT INCLUDED 

 


 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
Resin Tank Screws
Resin Tank Screws

Resin Tank Screws

Regular price $5.00
/
Shipping calculated at checkout.

These are the replacement resin vat screws for Epax 3D printers. These screws hold the vat in place during the printing process. Please make sure you select the correct screws for the machine you have.

  • Each pack contains 2 resin tank screws 


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 1 review Write a review
Cart
EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)
EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)
EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)

EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)

Regular price $55.00 Sale price $25.99
/
Shipping calculated at checkout.

This magnetic pad and steel plate are compatible with the E10 Version 2 All-Metal Rounded build plate or the original Molded build plate pictured below. It is attached to the existing build platform using an adhesive magnetic pad. This item does not come with the build platform itself. Not recommended for dental use.

 

This DOES NOT FIT the Angled Build Platform pictured below.

You can choose the magnetic pad+steel plate or the steel plate by itself.

Two options to choose from:

1, Magnetic pad and Steel Plate

2, Steel Plate Only

Steps to apply:

1, Clean your existing Metal Build Platform well.  Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.

2, Glue magnetic pad to the existing build platform.  The pad comes with glue pre-applied.

3, Put the steel plate on.

4, Re-level the new whole Build Platform similar to before.

Size: 9.12" x 5.56" (231mm x 141mm)

Caution:

You can use IPA to clean steel plate and magnetic pad surface.  But not to soak the magnetic pad into IPA.  Doing that will lead to the separate of the pad from build platform since IPA can dissolve the glue. 

If you just want magnetic pad+steel plate, or just steel plate, please choose the right option below.  Note that these magnetic pad and steel plate are only compatible with E10/E10-5K LCD resin printer.  It fits well to the E10 series Molded Build Platform.

NOTE: Before printing with new build surface, be sure to calibrate it for your EPAX 3D printer. 

See the video below for how to level or re-level your build plate:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 1 review Write a review
Cart
E10-4K / X10-4K Mainboards

E10-4K / X10-4K Mainboards

Regular price $129.00 Sale price $99.00
/
Only 2 left!
Shipping calculated at checkout.

The E10-4K/X10-4K mainboard is a replacement mainboard for EPAX E10 and X10 LCD printers with the 8.9" 4K mono screen.  This is the mainboard only and does not include any cables, connectors, or other components.

Please contact support@epax3d.com if you have any questions.


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)

EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)

Regular price $55.00 Sale price $12.99
/
Shipping calculated at checkout.

 

This magnetic pad and steel plate are compatible with the X10 or E10 all-metal ANGLED build plate pictured below. It is attached to the existing build platform using an adhesive magnetic pad. This item does not come with the build platform itself. Not recommended for dental use.


 

This DOES NOT FIT the E10's standard Molded Platform or the rounded version 2 All-metal build plate pictured below.

 

 

 

You can choose the magnetic pad+steel plate or the steel plate by itself.

Two options to choose from:

1, Magnetic pad and Steel Plate

2, Steel Plate Only

Steps to apply:

1, Clean your existing Metal Build Platform well.  Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.

2, Glue magnetic pad to the existing build platform.  The pad comes with glue pre-applied.

3, Put the steel plate on.

4, Re-level the new whole Build Platform similar to before.

Size: 9.12" x 5.625" (231mm x 143mm) 

Caution:

You can use IPA to clean the steel plate and magnetic pad surface.  But not to soak the magnetic pad in IPA.  Doing so will lead to the separation of the pad from the build platform since IPA can dissolve the glue. 

 

This magnetic build plate comes ready to install on your build platform quickly. After applying the magnetic pad and steel plate to your existing build platform, you must relevel your build platform because of the increased height of the build surface. Failure to relevel/recalibrate your build platform could result in damage to other parts such as the LCD screen. 

It is calibrated in the same way as the standard build platform.  See the video below as a reference:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart

LCD Screen - Choose your printer model

Sale price $229.00
/
Shipping calculated at checkout.

 

Includes:

  • LCD screen
  • Screen Cable
  • 1x precut tape 

 

Use the guide below to choose the correct screen for your printer model

E10-5K/X10-5K: 10.1" 5K mono screen.

E10-8K/X10-8K: 10.1" 8K mono screen.

E10-14KW/X10-14KW: 10.1" 14K mono screen

X1-4KS: 6.6" 4K mono screen.

X1K/E6: 6" 2K mono screen.

X1-4K: 5.5" 4K mono screen.

X10-4K/E10: 8.9" 4K mono screen. 

*There are some open box brand new screens due to upgrading E10 to E10-5K printers. Open boxed screens have signs of installation but never printed.

X10: 10.1" 2K color screen.

X1-Classic/X1-N/X1-DJ/X1-N-DJ: 5.5" 2K color screen with SX03.  

X1-Classic/X1-N/X1-DJ/X1-N-DJ: 5.5" 2K color screen with SX04.

*If you are unsure, please email to support@epax3d.com to help you find out which interface yours is.

X133: 13.3" 6K mono screen.

X133: 13.3" 7K mono screen.

NOTE TO EXISTING X133 CUSTOMERS: Our company is currently transitioning the X133 printers to a 7K mono-screen. Replacement 7K screens will be offered at the same price as the 4k LCD screens.  Matching 7K mainboard is free with 13.3" 6K screen purchase. To get the free 7K mainboard with 7K screen purchase, please email us at support@epax3d.com for arrangement. 

 

X156: 15.6" 4K color screen. 

X156: 16" 8K mono screen, only purchase this if you already upgraded your X156 to 16" 8K before. 

    Replacing your screen always involved re-leveling your build plate.

    ALWAYS make sure your vat is free from any debris and that the build plate has nothing on it before starting a new print job.  Monochrome screens are more expensive due to being produced in smaller volumes only for 3D printing.

    Disclaimer: Using this screen with non EPAX 3D printers is NOT supported.

     

    You can reference below general guide for screen replacement:

     

    https://epax3d.com/blogs/news/quick-guide-for-upgrade-from-x10-10-1-2k-color-to-x10-8-9-4k-mono

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Customer Reviews

    Based on 1 review Write a review
    Cart
    EPAX X1-4KS 6.6" Magnetic Build Plate and Steel Plate
    EPAX X1-4KS 6.6" Magnetic Build Plate and Steel Plate
    EPAX X1-4KS 6.6" Magnetic Build Plate and Steel Plate
    EPAX X1-4KS 6.6" Magnetic Build Plate and Steel Plate

    EPAX X1-4KS 6.6" Magnetic Build Plate and Steel Plate

    Regular price $39.00 Sale price $12.99
    /
    Shipping calculated at checkout.

    This magnetic build plate is compatible with X1-4KS 6.6" printers. It is attached to the existing build platform of X1-4KS printers using an adhesive magnetic pad.  Does not come with the build platform itself. Not recommended for dental use.

    You can choose the magnetic pad+steel plate or the steel plate by itself.

    Two options to choose from:

    1, Magnetic pad and Steel Plate

    2, Steel Plate Only

    Steps to apply:

    1, Clean your existing Metal Build Platform well.  Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.

    2, Glue magnetic pad to the existing build platform.  The pad comes with glue pre-applied.

    3, Put the steel plate on.

    4, Re-level the new whole Build Platform similar to before.

    Size: 5.75" x 3.625" (146mm x 92mm) 

    Caution:

    You can use IPA to clean the steel plate and magnetic pad surface.  But not to soak the magnetic pad in IPA.  Doing that will lead to the separation of the pad from the build platform since IPA can dissolve the glue. 

     

    This magnetic build plate comes ready to install on your build platform quickly. After applying the magnetic pad and steel plate to your existing build platform, you must recalibrate your build platform because of the increased height of the build surface. Failure to relevel/recalibrate your build platform could result in damage to other parts such as the LCD screen. 

    See the video below for how to level or re-level your build plate:

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Cart
    EPAX X1-4KS 6.6" nFEP Premium Film

    EPAX X1-4KS 6.6" nFEP Premium Film

    Regular price $14.99
    /
    Shipping calculated at checkout.

     

    Our nFEP films are a special blend of Teflon material.  This film leads to much less release force and as such higher print success rate.

    • 0.125mm thickness
    • Our nFEP films are excellent quality: resistant to high temperatures (up to 220° C), chemical resistant, UV stable and provide the ultimate non-stick surface for 3D resin printing.
    • nFEP is perfectly smooth - smoother than FEP film - with great air permeability, which leads to less vacuum suction force. So you will have fewer failed prints compared to standard FEP film.
    • All of our films are shipped in thoughtful, protective packaging to ensure they arrive to you in pristine condition.
    • Each tube contains 1 film

     

    How to Replace nFep Film

    Films are Made in Japan, Cut and Packed in China

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Cart
    Build Plate Knob
    Build Plate Knob
    Build Plate Knob
    Build Plate Knob

    Build Plate Knob

    Regular price $5.00
    /
    Shipping calculated at checkout.
    This is the replacement build plate knob for Epax 3D printers. Please make sure you select the correct knob for the machine you have.

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Cart
    Slotted Optical Switch
    Slotted Optical Switch
    Slotted Optical Switch

    Slotted Optical Switch

    Regular price $15.00
    /
    Shipping calculated at checkout.
    The Slotted Optical Switch is used to determine the home position of all Epax3D machines. If you are having issues with the build plate rising when you press the home button, your build plate thinking its at the home position when it's not, the red light on the optical switch flickering or not coming on at all, then you may need to replace the Optical Switch.

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Cart
    EPAX E10 ALL-METAL Build Platform
    EPAX E10 ALL-METAL Build Platform
    EPAX E10 ALL-METAL Build Platform
    EPAX E10 ALL-METAL Build Platform
    EPAX E10 ALL-METAL Build Platform
    EPAX E10 ALL-METAL Build Platform

    EPAX E10 ALL-METAL Build Platform

    Regular price $129.00
    /
    Shipping calculated at checkout.

    This is an alternate, optional build platform for the EPAX E10 3D printer. Its top bracket is unique to E10 printers. Is compatible with all variants of the E10 printer.

    Make sure that you order this for your E10 printer.  This is not for the X10 printer.

    It is made from soft aluminum with a sandblasted surface for the best adhesion and print removal, and it is constructed to be stable for minimal re-leveling.

    Angled E10 Build Platform Benefits

    Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.

    This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as our other build plates.

    The way to install it is similar to X10's build plate.  Please refer to the below video for installation:

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Cart
    EPAX X10 Parallel UV Light Upgrade Kit
    EPAX X10 Parallel UV Light Upgrade Kit

    EPAX X10 Parallel UV Light Upgrade Kit

    Regular price $299.00
    /
    Shipping calculated at checkout.

    This parallel matrix UV light kit has all the parts and screws necessary to change your existing, standard X10 light source to this newer light source that adds more dimensional accuracy and can capture the finer details of your prints- great for dental and jewelry applications.

    The latest edition of this light source now functions at a lower energy level - It is tuned to have about same exposure time as the standard light source, but it will help to prolong the lifespan of your LCD screen.

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Cart