Color
This is an alternate, optional build platform for the EPAX E10 3D printer. Its top bracket is unique to E10 printers. All E10s can be upgraded to a metal build plate.
Make sure that you order these for your E10 printer. This is not for the X10 printer.
It is made from soft aluminum with a sandblasted surface for the best adhesion and print removal, and it is constructed to be stable for minimal re-leveling.
Be sure to get the correct version for your E10. The 14/16K version will not fit on a 4/5/8K E10 and the 4/5/8K version will not fit on a 14/16K E10.
Metal Build Plate benefits
Using this build platform will minimize resin accumulation on the top of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.
This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as our other build plates.
If you are upgrading an older E10 that has a plastic build plate, you'll also need the E10 metal build arm kit. The metal plates will not fit onto the plastic build arm. You can find the metal build arm kit here.
The way to install it is similar to X10's build plate. Please refer to the below video for installation:
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.
EPAX E10/X10 8K Upgrade Kit -- choose your model
2 reviews
Regular price
$549.00
Sale price
$429.00
/
Only 1 left!
Shipping calculated at checkout.
Please choose the right kit for your printer. E10 and X10 use different brackets.
The EPAX X10/E10-8K 10.1 inch upgrade kits are made for all E10 and X10 machines with the parallel light source already installed.
The 8K Upgrade Kit Includes:
- 8K Mainboard
- 10.1" 8K Mono LCD Screen
- 10.1'' Screen Tape
- Screen Bracket
* You will need double-sided tape in order to install the screen to the bracket
FEATURES:
-
8k high resolution: 7680x 4320 with pixel size 28.5um
- 8K build volume of 218.88mm*123.12mm*250mm.
Installation instructions are available on our YouTube channel through the link below.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.
The new E10 all-metal build arm reinforces the printing assembly for a longer lifetime of printing.
When printing models with a center of mass further from the guide rail, a higher magnitude of stress is exhibited by the build arm. By implementing the all-metal build arm into your printer assembly, less fatigue becomes natural.
For customers looking to print larger and heavier models, the rigid all-metal build arm features less deflection and deformation. This allows for greater accuracy and consistency in printing success.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.