EPAX E10-8K 10.1" Mono LCD 3D Printer
All E10-8K printers ordered now (09/25/2022) are equipped with metal arm and metal build plate.
E10-8K Printer Specifications:
The NEW EPAX E10-8k is equipped with a 10.1-inch 8K Mono LCD screen. This Monochrome LCD screen optimizes the output of light exposure allowing for breakneck curing and print times of up to 100 mm/hr. The E10-8K is further equipped with a lensed light source consisting of ultraviolet LED matrix with a finely tuned lens array. The emitted UV rays are uniformly parallel creating an ultra-precise image resolution of 7680*4320 pixels. Pixel size is 28.5um. The pixel size is way more than enough for most applications. There is no need to go anything above 8K for this size.
With neck-breaking speed, accuracy down to the very finest of detail, and a massive build volume at 218.88 x 123.12 x 250 mm, the EPAX E10-8k offers an unprecedented combination of features that deliver swift, precise results down to every single detail.
Works with ChiTuBox Pro version slicers and Free Basic Version.  The mainboard and slicer both are supplied by ChiTuBox. Third-party slicer software might need ChiToBox's SDK in order to export files for this printer. If you use other slicers, such as Lychee, please consult the slicer maker for compatibility.
Â
Latest Chitubox has preconfigured and updated settings for our newest printers. You can find the download for the software here https://www.chitubox.com/en/index
KEY FEATURES:
- Preinstalled magnetic build surface
- 7680 x 4320 (8K) resolutionÂ
- High-quality dual-linear rails and lead screw
- Unique nFEP film leading to small release force and less stress on print
- High-quality latest parallel light
- User friendly & Out of the box ready- these printers come fully assembled with all accessories included except resin so you can start printing right away
- Molded vat costs much less, making it easy to own many. The molded vat is corrosion-resistant. The vat comes with an installed film and is just a bit over the cost of a film.
- Partially molded build plate, making it easy to get one spare for your printer.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Customer Reviews
EPAX X10 10.1" 8K Mono LCD 3D Printer
This EPAX X10 is equipped with a 10.1-inch 8K mono LCD screen. As with all other X series printers, this X10 is also an all-metal build for high-volume business customers. This Monochrome LCD screen allows for much faster exposure settings and higher resolution enabling users to print much faster and with greater detail.
XY resolution:Â Â 7680x 4320 with pixel size 28.5um
Both X10-8KW and X10-8K models come with:
- AÂ magnetic build plate
- Ethernet connectivity for network printing
- A 10.1" 8K mono screen that produces amazingly detailed prints at 28.5 microns
- Expect to receive it within 7 to 10 days.
Model X10-8KW:
- WiFi connectivity for network printing
- Wider vat for easy handling
- Vat with feet allowing you to set the vat on a surface without the film making contact
- Larger high-resolution touchscreen
- 3.5GB of internal storage
- File sharing capability
- Print History capability
- Adjustable power output for the LED array
- An addon heater can be installed. The heater DOES NOT COME WITH THE PRINTER but can be purchased here
BUILD VOLUME: 8K build volume of 218.88mm*123.12mm*250mm. The X10 8K utilizes a lensed light source consisting of an ultraviolet LED matrix with a finely tuned lens array. The emitted UV rays are uniformly parallel creating ultra-precise prints.
Â
Works with ChiTuBox Pro version slicers and Free Basic Version. The mainboard and slicer both are supplied by ChiTuBox. Third-party slicer software might need ChiToBox's SDK in order to export files for this printer. If you use other slicers, such as Lychee, please consult the slicer maker for compatibility.Â
Settings for this machine are already built into Chitubox Free Basic and pro slicer software. Make sure to select the ".CTB" file format when slicing and saving files.
You can update to Chitubox version 1.9.x. It has preconfigured and updated settings for our newest printers. You can find the download for the software here https://www.chitubox.com/en/index
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
EPAX X1-4KS 6.6" Mono LCD 3D Printer
- 4K MONO (6.6 inch) LCD masking screen. 4098x2560 (4K) HD masking LCD allows for amazing print detail and much faster printing speed. It typically only needs 2.5 to 3 seconds for normal exposure time, compared to color screen which needs 8 to 10 seconds. Pixel size is 35 microns.
- The mono screen can last several thousands hours of normal use.
- Parallel UV light source -- This is the most advanced light source, providing more print detail for dental and jewelry applications where finer details are beneficial as well as a more even distribution of the light across the entire build area.
- 3.5-inch Color TFT Touchscreen. Â
- Excellent Z-axis stability.Â
- Pre-installed nFEP film to allow easier detachment during printing (you can still use standard FEP films with this printer if you prefer).
- Sanded build platform surface made of soft aluminum for better adhesion and easier print removal.
- Anti-Aliasing supported and enabled in installed firmware.
- Wide selection of supported resins - you can use any 405nm wavelength 3D printing resins.
- 143.43mm (L) *89.66mm (W) *155mm (H) build volume
Â
Each printer purchase includes:
- 1x spare nFEP film, 0.125mm thickÂ
- 1x USB stick. No files on the USB stick. For the latest user manual please check the support tab above.
-
1x power adapter
-
1x plastic scraper tool
- 1x metal scraper tool
- 1x allen wrench
- 2x resin filters
 Â
Please read and understand our Warranty, Return, and Refund Policies before purchasing a printer.Â
Â
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Customer Reviews
The EPAX X133-6K upgrade kits are made for experienced 3D Printer customers, as the installation process is complex.Â
The lensed parallel light will increase dimensional accuracy of your prints. When combined with the 6K resolution LCD screen, you can produce highly detailed products.
The X133-6KÂ Upgrade Kit Includes:Â
- X133-6K Mainboard
- 13.3" ScreenÂ
- 13.3'' Screen TapeÂ
- Parallel Light Source
- Power Supply
- 2 Mounting Brackets
* You will need double-sided tape in order to install the screen to the bracket
FEATURES:
-
6k high resolution of 5760 x 3240
- 288mm*162mm*400mm build volume
Installation instructions are available on our YouTube channel through the link below.Â
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
EPAX E10/X10 5K 10.1" Mono LCD Upgrade Kit (open box new screen)
The EPAX E10-5K 10.1 inch upgrade kits are made for EPAX E10 4K 8.9-inch mono printers.Â
The E10-5K upgrade kits include:Â
- E10-5K Mainboard
- 10.1" Screen & Screen Bracket (open box screen pulled out of brand new 5K printer)
- 10.1'' Screen TapeÂ
Only works with ChiTuBox Pro version slicers and Free Basic Version.  The mainboard and slicer both are supplied by ChiTuBox. Other third-party slicers might need ChiTuBox's SDK in order to slice into files for this printer.
* You will need double-sided tape in order to install the screen to the bracket
FEATURES:
-
5k high resolution of 4920 *2800Â
- 20% larger build surfaceÂ
- 221.4mm*129.6mm*250mm build volumeÂ
- 565 pixels per inch
Installation instructions will be available at the time of shipment via this listing and our YouTube channel.Â
Â
Â
X10-5K/E10-5K PRINTER SPECIFICATIONS
Â
Â
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)
Â
This magnetic pad and steel plate are compatible with the X10 or E10 all-metal ANGLED build plate pictured below. It is attached to the existing build platform using an adhesive magnetic pad. This item does not come with the build platform itself. Not recommended for dental use.

Â
This DOES NOT FIT the E10's standard Molded Platform or the rounded version 2 All-metal build plate pictured below.
Â


Â
Â
You can choose the magnetic pad+steel plate or the steel plate by itself.
Two options to choose from:
1, Magnetic pad and Steel Plate
2, Steel Plate Only
Steps to apply:
1, Clean your existing Metal Build Platform well. Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.
2, Glue magnetic pad to the existing build platform. The pad comes with glue pre-applied.
3, Put the steel plate on.
4, Re-level the new whole Build Platform similar to before.
Size: 9.12" x 5.625" (231mm x 143mm)Â
Caution:
You can use IPA to clean the steel plate and magnetic pad surface. But not to soak the magnetic pad in IPA. Doing so will lead to the separation of the pad from the build platform since IPA can dissolve the glue.Â
Â
This magnetic build plate comes ready to install on your build platform quickly. After applying the magnetic pad and steel plate to your existing build platform, you must relevel your build platform because of the increased height of the build surface. Failure to relevel/recalibrate your build platform could result in damage to other parts such as the LCD screen.Â
It is calibrated in the same way as the standard build platform. See the video below as a reference:
Â
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)
This magnetic pad and steel plate are compatible with the E10 Version 2 All-Metal Rounded build plate or the original Molded build plate pictured below. It is attached to the existing build platform using an adhesive magnetic pad. This item does not come with the build platform itself. Not recommended for dental use.


Â
This DOES NOT FIT the Angled Build Platform pictured below.

You can choose the magnetic pad+steel plate or the steel plate by itself.
Two options to choose from:
1, Magnetic pad and Steel Plate
2, Steel Plate Only
Steps to apply:
1, Clean your existing Metal Build Platform well. Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.
2, Glue magnetic pad to the existing build platform. The pad comes with glue pre-applied.
3, Put the steel plate on.
4, Re-level the new whole Build Platform similar to before.
Size: 9.12" x 5.56" (231mm x 141mm)
Caution:
You can use IPA to clean steel plate and magnetic pad surface. But not to soak the magnetic pad into IPA. Doing that will lead to the separate of the pad from build platform since IPA can dissolve the glue.Â
If you just want magnetic pad+steel plate, or just steel plate, please choose the right option below. Note that these magnetic pad and steel plate are only compatible with E10/E10-5K LCD resin printer. It fits well to the E10 series Molded Build Platform.
NOTE: Before printing with new build surface, be sure to calibrate it for your EPAX 3D printer.Â
See the video below for how to level or re-level your build plate:
Â
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Customer Reviews
The new X156 / X133 top bracket allows for a more secure attachment to the build arm as well as improved stability.
Â
X156 / X133 Build Plate -Â NOT INCLUDEDÂ
Â
Â
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
EPAX Precision PLA Resin, Bio-Based General PLA Resin for LCD 3D Printers
* We cannot ship resins internationally at this time. *
EPAX Precision PLA-Based Bio-Resin is manufactured using PLA (polylactic acid) which is derived from corn - a renewable resource. It is Biodegradable and Environmentally Friendly.
EPAX Precision PLA resin results higher precision in printing models for your needs. It is suitable for all kinds of prints that require high resolution, good toughness, high precision and high hardness. This is an ideal resin for general purpose projects. It is easy to use and a great beginner resin if you are just getting started with your printer.
- Synthesized by Lactic Acid Extracted from Corn. Environmentally Friendly and Biodegradable
- High Hardness (78-80D) and low shrinkage (~7%)
- Faster Printing Speed
- Low odor, Low Irritation
- High successful printing rate
- Compatible to most LCD printers using405 nm wavelength light, including all EPAX printers and Anycubic Photon, Wanhao D7, Phrozen, Monoprice, etc.
Printing Parameter
Exposure parameters:
Bottom exposure time(s) 25s, normal exposure time(s) 2.5s
Lifting Speed: 50-200mm/min
Retraction Speed: 150-300mm/min
Number of bottom layers: 4
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
The new E10 all-metal build arm reinforces the printing assembly for a longer lifetime of printing.Â
When printing models with a center of mass further from the guide rail, a higher magnitude of stress is exhibited by the build arm. By implementing the all-metal build arm into your printer assembly, less fatigue becomes natural.Â
For customers looking to print larger and heavier models, the rigid all-metal build arm features less deflection and deformation. This allows for greater accuracy and consistency in printing success.Â
 Â
Â
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.  If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.Â
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.
Â
Returns and Refunds
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.