Resins

EPAX Precision PLA Resin, Bio-Based General PLA Resin for LCD 3D Printers

Sale price $21.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

EPAX Precision PLA-Based Bio-Resin is manufactured using PLA (polylactic acid) which is derived from corn - a renewable resource. It is Biodegradable and Environmentally Friendly.

EPAX Precision PLA resin results higher precision in printing models for your needs. It is suitable for all kinds of prints that require high resolution, good toughness, high precision and high hardness. This is an ideal resin for general purpose projects. It is easy to use and a great beginner resin if you are just getting started with your printer.

  • Synthesized by Lactic Acid Extracted from Corn. Environmentally Friendly and Biodegradable
  • High Hardness (78-80D) and low shrinkage (~7%)
  • Faster Printing Speed
  • Low odor, Low Irritation
  • High successful printing rate
  • Compatible to most LCD printers using405 nm wavelength light, including all  EPAX printers and Anycubic Photon, Wanhao D7, Phrozen, Monoprice, etc.

Printing Parameter

Exposure parameters:

Bottom exposure time(s) 25s,  normal exposure time(s) 2.5s

Lifting Speed: 50-200mm/min

Retraction Speed: 150-300mm/min

Number of bottom layers: 4


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart

EPAX Hard Resin, Specially Designed for large LCD 3D Printers, UV 405nm

Regular price $43.99 Sale price $36.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

Original formula 

EPAX Hard Resin was specially formulated for large printers.  It is a very stable resin.  Due to more background light and longer printing time/size, the EPAX hard resin is specially formulated to withstand background light for long time and generate heat slowly and evenly.  By controlling sudden rising of hot spot, LCD screen can last longer.  The hard resin also produces less release force, making it ideal to print things large.  It is also less stress on prints during each layer release.

It is the ideal resin for everyday uses and is the recommended resin for our larger printers such as X10, X133 and X156.   It sure also works great with our X1 printers and any other LCD resin printers on market.

 

For Mono screens, the recommended settings are:

 For Color screens, the recommended settings are:

 

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Customer Reviews

Based on 2 reviews Write a review
Cart
EPAX General Purpose Rapid LCD Resin, UV 405nm
EPAX General Purpose Rapid LCD Resin, UV 405nm
EPAX General Purpose Rapid LCD Resin, UV 405nm
EPAX General Purpose Rapid LCD Resin, UV 405nm

EPAX General Purpose Rapid LCD Resin, UV 405nm

Sale price $20.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

EPAX General Purpose Rapid LCD Resin in gray is the perfect resin for any standard 3D printing projects. The gray color is easy to prime and paint and is great unpainted for basic prototyping. When cured, this resin is sturdy and durable for functional pieces in addition to displays. This is an easy-to-use resin, excellent for beginners, compatible with printers that use 405 nm UV resins.

 

Recommended for:

EPAX E6 Printer

EPAX E10 Printer

EPAX X1 series Printers

EPAX X10 series Printers

 



Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm

EPAX Hard & Tough Resin for LCD 3D Printers, UV 405nm

Regular price $75.99 Sale price $58.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

  • True ABS-like
  • Hard and Tough Resin, Compatible to most LCD printers using 405 nm wavelength light
  • Hardness 81 shore D, Low Shrinkage
  • Scratch resistance
  • Faster Printing Speed
  • Prints can stay durable for a long time
  • Easy to print on all LCD printers

 

 

Benefits of EPAX Hard and Tough Resin

  • Solid, hard plastic after curing
  • Tough
  • low odor
  • minimal shrinkage (~3%)
  • easy clean-up with isopropyl alcohol

 

 



Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG

EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG

Regular price $39.99 Sale price $37.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

 

EPAX Water Washable Resin is water-soluble and can be cleaned up using room temperature tap water instead of isopropyl alcohol. It is low-odor in addition to avoiding the odor associated with IPA used in the clean-up of standard resins. This resin allows for faster printing speeds than most general purpose resins without sacrificing print quality.

Our Water Washable resin was designed specifically for capturing high-detail and is great for display pieces.  Oily looking right after printed but it is actually good looking after cured and dried.  It is also less easily get moisture impact, unlike other brand water washable resins which could get peeled off or cracked after weeks.   

It is compatible with most LCD printers that use 405nm wavelength UV light. 

 

* NOTE: the water used in post-processing and clean-up must be exposed to UV light before disposal and should not be poured directly down any drain. 

 

Recommended Resin Profiles for EPAX Printers

For mono screen printers, 0.05mm layer height, normal exposure time about 2s.

For color screen printers, 0.05mm layer height, normal exposure time about 8s.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX Water-Washable Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Water-Washable Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Water-Washable Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm

EPAX Water-Washable Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm

Regular price $89.99 Sale price $79.99
/
Shipping calculated at checkout.
* We cannot ship resins internationally at this time. *

EPAX Water Washable Dental Model Resin for Orthodontics provides very minimal amount of shrinkage in a 3D printing resin. It is the recommended resin for dental and orthodontic applications.
With a shrinkage rate only around 2% it is capable of capturing a very high level of detail, making this resin ideal for the accurate modeling of teeth and gums for the production of retainers, night guards, and more. 
EPAX Water Washable Dental Resin is water-soluble and can be cleaned up using room temperature tap water instead of isopropyl alcohol. It is low-odor in addition to avoiding the odor associated with IPA used in the clean-up of standard resins. This resin allows for faster printing speeds than most general purpose resins without sacrificing print quality.

Color: Beige


Recommended Settings for EPAX Printers using Color Screen:

  • Normal Exposure Time: 8 seconds
  • Bottom Exposure Time: 50 to 60 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 60mm/s
  • Retraction Speed: 150mm/s
Recommended Settings for EPAX Printers using Mono Screen:

  • Normal Exposure Time: 2 to 2.5 seconds
  • Bottom Exposure Time: 25 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 60mm/s
  • Retraction Speed: 150mm/s

 


Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm
EPAX High Precision Engineering Resin, UV 405nm

EPAX High Precision Engineering Resin, UV 405nm

Sale price $48.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

 EPAX High Precision Resin was specially formulated for EPAX printers.

Color: Black only

No other color options.

EPAX High Precision Resin is suitable for printing detailed, precise parts while minimizing resin expansion and contraction during printing. High precision resin offers unparalleled dimensional accuracy for prints that require low margins of error. 

  

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart

EPAX Soy-Based Resin, UV 405nm 1KG

Regular price Sale price $58.99
/
Shipping calculated at checkout.
* We cannot ship resins internationally at this time. *

EPAX has formulated this great alternative to petroleum-based resins most often used in 3D printing. Our plant-based bio-resin is derived from soy. Improved performance.  It has very little odor and very low toxicity, making it one of the safest resins while also being made from a renewable resource.

To Learn More about EPAX 3D Dental Resins, please visit epaxdental.com



Soy-based resins do not sacrifice quality and are an excellent standard and general purpose resin for everyday printing projects. 

This is a 405nm UV resin compatible with EPAX 3D printers as well as other LCD printers that use 405nm resins.

Note: Although this resin liquid is less toxic than other resins, normal safety precautions should still be used and the printer should only be used in a well-ventilated area. 




 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX Dental Model Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Dental Model Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Dental Model Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm

EPAX Dental Model Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm

Regular price $89.00
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *


EPAX Dental Model Resin for Orthodontics provides very minimal amount of shrinkage in a 3D printing resin. It is the recommended resin for dental and orthodontic applications.






To Learn More about EPAX 3D Dental Resins, please visit epaxdental.com


With a shrinkage rate only around 2% it is capable of capturing a very high level of detail, making this resin ideal for the accurate modeling of teeth and gums for the production of retainers, night guards, and more. 




Color: Orange





Recommended Settings for EPAX Printers using Color Screen:

  • Normal Exposure Time: 8 seconds
  • Bottom Exposure Time: 50 to 60 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 60mm/s
  • Retraction Speed: 150mm/s
Recommended Settings for EPAX Printers using Mono Screen:

  • Normal Exposure Time: 2 to 2.5 seconds
  • Bottom Exposure Time: 25 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 60mm/s
  • Retraction Speed: 150mm/s



Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

 

Cart
EPAX Porcelain-Like Resin for LCD 3D Printers, UV 405nm Color - White - New Release!
EPAX Porcelain-Like Resin for LCD 3D Printers, UV 405nm Color - White - New Release!
EPAX Porcelain-Like Resin for LCD 3D Printers, UV 405nm Color - White - New Release!

EPAX Porcelain-Like Resin for LCD 3D Printers, UV 405nm Color - White - New Release!

Regular price $74.99 Sale price $55.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

  • Prints has Porcelain-like shining surface with high precision
  • Porcelain White color
  • Hard and Very Low Shrinkage
  • Low odor
  • Easy to print
  • Very good surface scratch resistance
  • Great for printing art work like sculpture

Print Parameters:

Mono Screen

Bottom Layer Count : 4 - 6

Exposure time :  2-3.5 S

Bottom Exposure Time : 20-35 S

Color Screen

Bottom Layer Count : 4 - 6

Exposure time :  10-15 S

Bottom Exposure Time : 50- 75 S

 


     


    Recommended Resin Settings on EPAX Printers 

    Below are properties of some of our resins:

     

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Customer Reviews

    Based on 2 reviews Write a review
    Cart
    EPAX High Temperature Resin, UV 405nm 1KG

    EPAX High Temperature Resin, UV 405nm 1KG

    Regular price $74.99 Sale price $68.99
    /
    Shipping calculated at checkout.

    * We cannot ship resins internationally at this time. *

    EPAX High Temperature Resin was specially formulated for EPAX printers.

    EPAX High temperature Resin is suitable for printing detailed, precise parts for use in high temperature applications. High temperature resin offers unparalleled thermal deflection for prints that require exceptional heat management without deformation.  

    Can withstand a high temperature as high as 220 Celsius.  

      

    Recommended Resin Settings on EPAX Printers 

    Below are properties of some of our resins:

     

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Cart
    EPAX Castable Resin for Jewelry, UV 405nm 0.5KG
    EPAX Castable Resin for Jewelry, UV 405nm 0.5KG
    EPAX Castable Resin for Jewelry, UV 405nm 0.5KG
    EPAX Castable Resin for Jewelry, UV 405nm 0.5KG
    EPAX Castable Resin for Jewelry, UV 405nm 0.5KG

    EPAX Castable Resin for Jewelry, UV 405nm 0.5KG

    Regular price $148.00 Sale price $115.00
    /
    Only 2 left!
    Shipping calculated at checkout.
    * We cannot ship resins internationally at this time. *

    EPAX Jewelry Castable resin is the ideal resin for jewelers. It has a higher wax content to give a clean burnout for investment casting with no ash. Printed parts may also be used for detailed, accurate custom try-ons/prototyping. After a wash in isopropyl alcohol pieces are smooth with no tackiness and durable enough for handling with no additional curing needed. This resin is available in blue to highlight the most intricate details of rings, pendants, and other designs.

    Color:  Blue or Green
     
    Suggested Slicer Settings for color screen printers:
    • Normal Exposure Time: 16 seconds
    • Bottom Exposure Time: 80 seconds
    • Bottom Layers: 4
    • Layer Height: 0.05mm
    • Lift Speeds: 30mm/s
    • Retraction Speed: 120mm/s

     

     


    Recommended Resin Settings on EPAX Printers 

    Below are properties of some of our resins:

     

    Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

    *Please carefully read and be sure you understand the following before purchasing a printer*:

    Warranty Information

    New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

    Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

    All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

    Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

    If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

     

    Returns and Refunds

    If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

    For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

    For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

    You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

     

    Walk-in Policy

    For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  

     

    Cart