all products except X156

EPAX X156 Angled Build Platform
EPAX X156 Angled Build Platform
EPAX X156 Angled Build Platform
EPAX X156 Angled Build Platform
EPAX X156 Angled Build Platform

EPAX X156 Angled Build Platform

Regular price $199.00
/
Shipping calculated at checkout.

Build platform for the EPAX X156 3D printer. It is made from soft aluminum with a sanded surface for the best adhesion and print removal, and it is constructed to be stable for minimal re-leveling.

Angled X156 Build Platform Benefits

Using this build platform will minimize resin accumulation on the stop of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.

 

This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as all other build plates of all printers. See the video below as a reference:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X10 build platform upgrade angled build plate
EPAX X133 Angled Build Platform
EPAX X10 beveled build platform
EPAX X10 beveled angled tapered build plate

EPAX X133 Angled Build Platform

Regular price $159.00
/
Only 1 left!
Shipping calculated at checkout.

Build platform for the EPAX X133 3D printer. It is made from soft aluminum with a sanded surface for the best adhesion and print removal, and it is constructed to be stable for minimal re-leveling.

Angled X133 Build Platform Benefits

Using this build platform will minimize resin accumulation on the stop of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.

 

This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as all other build plates of all printers. See the video below as a reference:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX High Precision Engineering Resin, UV 405nm 0.5kg

EPAX High Precision Engineering Resin, UV 405nm 0.5kg

Regular price $48.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

 

EPAX High Precision Resin was specially formulated for EPAX printers.

Color: Grey

EPAX High Precision Resin is suitable for printing detailed, precise parts while minimizing resin expansion and contraction during printing. High precision resin offers unparalleled dimensional accuracy for prints that require low margins of error. 

  

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X156 Aluminum Resin Tank with nFEP Film Installed

EPAX X156 Aluminum Resin Tank with nFEP Film Installed

Regular price $249.00
/
Shipping calculated at checkout.

Our resin vats are made entirely of durable, machine-anodized aluminum. This vat will fit EPAX X156 3D printers. Each vat comes with a sheet of nFEP film already installed, so it will arrive ready to use. 

Features

  • Aluminum build means the tank will not be harmed by resin or curing process
  • Equipped with a rubber seal to ensure that vat is water-tight to avoid resin leaks
  • Groove in the front-right corner allows for draining residual resin simple and quick
  • Hash-marks indicate resin levels for the vat.
  • Max volume of 3300mL without build platform and 2300mL with build platform.


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
Slotted Optical Switch
Slotted Optical Switch
Slotted Optical Switch

Slotted Optical Switch

Regular price $15.00
/
Only 9 left!
Shipping calculated at checkout.
The Slotted Optical Switch is used to determine the home position of all Epax3D machines. If you are having issues with the build plate rising when you press the home button, your build plate thinking its at the home position when it's not, the red light on the optical switch flickering or not coming on at all, then you may need to replace the Optical Switch.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X133 Aluminum Resin Tank with nFEP Film Installed

EPAX X133 Aluminum Resin Tank with nFEP Film Installed

Regular price $229.00
/
Only 1 left!
Shipping calculated at checkout.

Our resin vats are made entirely of durable, machine-anodized aluminum. This vat will fit EPAX X133 3D printers. Each vat comes with a sheet of nFEP film already installed, so it will arrive ready to use. 

Features

  • Aluminum build means the tank will not be harmed by resin or curing process
  • Equipped with a rubber seal to ensure that vat is water-tight to avoid resin leaks
  • Groove in the front-right corner allows for draining residual resin simple and quick
  • Hash-marks indicate resin levels for the vat.
  • Max volume of 2400mL without build platform and 1700mL with build platform.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10 4k 8.9" monochrome masking screen LCD 3d printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
X10 3D printer resin vat
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
X10 print sample dental models
EPAX X10 print samples dental orthodontic models
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer
EPAX X10-5K 10.1" 5K UV LCD 3D Printer

EPAX X10-5K 10.1" 5K UV LCD 3D Printer

Regular price $1,999.00
/
Shipping calculated at checkout.

 

FREE USA SHIPPING

The EPAX X10 is equipped with an 10.1-inch 5K mono LCD screen. This Monochrome LCD screen allows for much faster exposure settings and higher resolution enabling users to print much faster and with greater detail.

BUILD VOLUME: 5K build volume of 221.4mm*129.6mm*250mm. The X10 5K utilizes a lensed light source consisting of an ultraviolet LED matrix with a finely tuned lens array. The emitted UV rays are uniformly parallel creating an ultra precise prints.

 

 

Please note that your X10 5K mono printer can only be used with the Chitubox Slicing software (for now).  Settings for this machine are already built into Chitubox Pro and Basic slicer software. Make sure to select ".CTB" file format when slicing and saving files.

 

 

 

 

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX 3D GIFT CARD

EPAX 3D GIFT CARD

Regular price $10.00
/
Shipping calculated at checkout.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X10/DX10  Magnetic Build Plate
EPAX X10/DX10  Magnetic Build Plate
EPAX X10/DX10  Magnetic Build Plate
EPAX X10/DX10  Magnetic Build Plate

EPAX X10/DX10 Magnetic Build Plate

Regular price $55.00
/
Shipping calculated at checkout.

 

This magnetic build plate is compatible to X10/DX10 printers.  It is glued to existing build platform of X10/DX10 printers.  Does not come with build platform itself.

You can choose magnetic pad+steel plate, or just steel plate.

This magnetic build plate comes ready to install it to your build platform quickly. After applying the magnetic pad and steel plate onto your existing build platform, you must recalibrate your build platform because of different height now.   Failure to relevel/recalibrate your build platform could result in damage to other parts such as LCD screen. 

It is calibrated in the same way as the standard build platform.  See the video below as a reference:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
Build Plate Knob
Build Plate Knob
Build Plate Knob
Build Plate Knob

Build Plate Knob

Regular price $5.00
/
Shipping calculated at checkout.
This is the replacement build plate knob for Epax 3D printers. Please make sure you select the correct knob for the machine you have.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX E10-4K/X10-4K Mainboards

EPAX E10-4K/X10-4K Mainboards

Regular price $129.00
/
Only 4 left!
Shipping calculated at checkout.

The E10-4K/X10-4K mainboard is a replacement mainboard for EPAX E10 and X10 LCD printers with the 8.9" 4K mono screen. Use with other similar printers is not supported. This is the mainboard only and does include any cables, connectors, or other components.

Please contact support@epax3d.com if you have any questions.


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX DX10/DX1 Pre-cut Tape, Choose Size

EPAX DX10/DX1 Pre-cut Tape, Choose Size

Regular price $4.99
/
Shipping calculated at checkout.


This tape should be installed on top of your LCD screen to help protect your printer from resin spills as well as hold your LCD screen in place. It will prevent any leaked resin from dripping underneath your screen and potentially damaging your printer. It will also hold your screen in place if you have to lay your printer down to perform maintenance, etc.


This is the screen tape ONLY. Replacement LCD screens must be purchased separately.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX DX10 Angled Build Platform with Magnetic Build Plate
EPAX DX10 Angled Build Platform with Magnetic Build Plate
EPAX DX10 Angled Build Platform with Magnetic Build Plate
EPAX DX10 Angled Build Platform with Magnetic Build Plate
EPAX DX10 Angled Build Platform with Magnetic Build Plate

EPAX DX10 Angled Build Platform with Magnetic Build Plate

Regular price $249.00
/
Shipping calculated at checkout.


This build platform is only compatible to DX10 printers.

It has magnetic pad pre-installed, as well as a steel plate.

If you just want magnetic pad+steel plate, or just steel plate, please choose the right option below.

Angled DX10 Build Platform Benefits

Using this build platform will minimize resin accumulation on the stop of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.

 

This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as the standard flat build plate. See the video below:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX DX10 Aluminum Resin Tank with nFEP Film Installed

EPAX DX10 Aluminum Resin Tank with nFEP Film Installed

Regular price $249.00
/
Only 5 left!
Shipping calculated at checkout.

Our resin vats are made entirely of durable, machine-anodized aluminum. This vat will fit and only fit EPAX DX10 3D printers. Each vat comes with a sheet of nFEP film already installed, so it will arrive ready to use. 

It has heating wire attached.

Features

  • The completely metal resin tank will not be harmed by resin nor the curing process. 
  • It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
  • The groove in the front right corner makes draining residual resin easy and fast.
  • Hash-marks on the back edge of the vat indicate resin levels.
  • Max Volume of 1250mL without build platform and 900mL with build platform.

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX DX1 Angled Build Platform with Magnetic Build Plate
EPAX DX1 Angled Build Platform with Magnetic Build Plate
EPAX DX1 Angled Build Platform with Magnetic Build Plate
EPAX DX1 Angled Build Platform with Magnetic Build Plate

EPAX DX1 Angled Build Platform with Magnetic Build Plate

Regular price $189.00
/
Shipping calculated at checkout.

Our soft aluminum EPAX DX1 build plates allow for both optimal bottom layer adhesion as well as print removal. They have a gently sanded surface and are constructed to be stable, secure and seldom require re-leveling.

This build platform has all the parts/screws necessary to install it right away.  It is only compatible for DX1 printer. 

It has magnetic pad pre-installed, as well as a steel plate.

If you just want magnetic pad+steel plate, or just steel plate, please choose the right option below.  Note that these magnetic pad and steel plate are only compatible with DX1 which is a 6.6" LCD resin printer.

NOTE: Before using your new build platform, be sure to calibrate it for your EPAX 3D printer. 

See the video below for how to level or re-level your build plate:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX DX1 Aluminum Resin Tank with nFEP Film Installed

EPAX DX1 Aluminum Resin Tank with nFEP Film Installed

Regular price $189.00
/
Shipping calculated at checkout.

Made entirely of durable anodized aluminum and with a sheet of nFEP film already installed, this EPAX DX1 resin vat will arrive ready to use. 

It has heating wire installed.

Features

  • The completely metal resin tank will not be harmed by resin nor the curing process. 
  • It is equipped with a rubber seal to ensure that the vat is water-tight.
  • The groove in the front right corner makes draining unused resin easy and fast.
  • Hash-marks on the back edge of the vat indicate resin levels.
  • Max Volume is 450mL without build platform and 300mL with build platform.



Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX nFEP Premium Film for DX1 (6.6") Printer (1 Film)

EPAX nFEP Premium Film for DX1 (6.6") Printer (1 Film)

Regular price $14.99
/
Shipping calculated at checkout.
Our nFEP films are a special blend of Teflon material.  This film leads to much less release force and as such higher print success rate.
  • 0.125mm thickness
  • Our nFEP films are excellent quality: resistant to high temperatures (up to 220° C), chemical resistant, UV stable and provide the ultimate non-stick surface for 3D resin printing.
  • nFEP is perfectly smooth - smoother than FEP film - with great air permeability, which leads to less vacuum suction force. So you will have fewer failed prints compared to standard FEP film.
  • All of our films are shipped in thoughtful, protective packaging to ensure they arrive to you in pristine condition.
  • Each tube contains 1 film

Films are Made in Japan, Cut and Packed in China

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
DX1 PRO Dental Printer
DX1 PRO Dental Printer
DX1 PRO Dental Printer
DX1 PRO Dental Printer
DX1 PRO Dental Printer
DX1 PRO Dental Printer

DX1 PRO Dental Printer

Regular price $1,899.00 Sale price $1,699.00
/
Shipping calculated at checkout.

Free shipping in the USA. Expect to receive within 7 to 10 days.

Free 1KG EPAX Dental Model Resin with this printer.

Free 1 hour video call to help you set it up.

 

Specs:

Build Volume

 143.43mm*89.66mm*120mm

Printing Technology

Monochrome LCD

Resolution

4098*2560 (5K)

Layer Thickness

0.02mm-0.1mm

Connection

USB Drive, Ethernet

Build Platform

Soft Aluminum with Magnetic Build Plate and Steel Build Surface

Z axis Dual rail with Ball Bearing Z axis motor
Resin Vat Hard Aluminum
Heated Vat Yes
Max Resin Volume 300mL
Air Filter Yes
Light Source Parallel Light LED Matrix
Film nFEP Film
Touch Screen 4.3-inch Color TFT (Angled and Recessed)
Slicer  ChiTuBox
Printer body All metal with swing door
Resin Compatibility All 405nm LCD resins.  Verified with many 3rd party resins such as Dentona, KeyStone and WhipMix.  Pre-configured settings in ChiTuBox slicer.
Product Size (W*D*H) 9.5x9.5x14.5 inches
Product Net Weight 20lbs

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
DX Cure Pro
DX Cure Pro
DX Cure Pro
DX Cure Pro

DX Cure Pro

Regular price $599.99
/
Shipping calculated at checkout.

Free shipping in the USA. Expect to receive within 7 to 10 days.

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX Dental Castable Resin, 405nm 500g
EPAX Dental Castable Resin, 405nm 500g
EPAX Dental Castable Resin, 405nm 500g

EPAX Dental Castable Resin, 405nm 500g

Regular price $149.00
/
Only 5 left!
Shipping calculated at checkout.
  • Ultra low shrinkage 0.85-1.0%
  • Easy Casting for Dental implant Restoration Frame & Crown
  • High precision 
  • Ash free casting for dental crown and frame
  • Low odor, pass REACH, ROHS, EN71-3 certificate
  • Suitable for all Epax 3D dental printers

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart