EPAX X160 / X156 / X133 Pre-cut Screen Tape -- choose model
Please choose the right size for your printer!
This tape should be installed on top of your LCD screen to help protect your printer from resin spills as well as hold your LCD screen in place. It will prevent any leaked resin from dripping underneath your screen and potentially damaging your printer. It will also hold your screen in place if you have to lay your printer down to perform maintenance, etc.
The 16" screen tape is cut and sized to fit the EPAX X160 with a 16" 8K mono screen and X156 8K mono screen.
The 15.6" screen tape is cut and sized to fit EPAX X156 with 15.6" 4K color screen.
The 13.3" screen tape is cut and sized to fit EPAX X133 with 13.3" 4K and 6K mono screen.
This is the screen tape ONLY. Replacement LCD screens must be purchased separately.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.
(Refurbished) EPAX E10 Series Mono LCD 3D Printer
This is a USED EPAX E10 printer in good working condition. The exact condition of the printer will vary. Sometimes a refurbished printer will have minor cosmetic damage (such as a dent or scratch on the frame or scuffs). Some will have some signs of use (such as minor scratches on the build plate or vat), but nothing that will impact printing.
Build plate/arm and vat are molded plastic parts.
The printer will be in good working condition and is tested before shipping out. Your printer will arrive calibrated and ready to print.
We do not ship refurbished printers internationally. They are only available for domestic US customers.
This EPAX E10 is a mid-sized printer, with either 8.9" 4K, 10.1" 5K or 8K mono screen loaded. Monochrome LCD screens allow for much faster exposure settings and have a much longer lifespan than color LCD screens.
The E10 has same printing volume height as X10 at 250mm.
Features of the E10 3D LCD Printer:
- High quality dual-linear rails and lead screw
- Unique nFEP film leading to small release force and less stress on print
- High quality latest parallel light
- Versatile screen options. Can be loaded with 8.9" 4K, 10.1" 5K or 8K screen (Compatible 5K/8K mainboard needed).
- Modular design. Making upgrades easier. Non-customized ChiTu mainboard thus making future upgrades easy.
- Molded vat costs much less, making it easy to own many. The molded vat is corrosion resistant. The vat comes with an installed film and is just a bit over the cost of a film.
- Partially molded build plate, making it easy to get one spare for your printer.
- Heavy foundation and frame making it a stable machine.
Available Models:
- 192mm (L) *120mm (W) *250mm (H) build volume (10.1" 4K color edition)
- 221.4mm (L) *129.6mm (W) *250mm (H) build volume (10.1" 5K mono edition)
- 218.88mm (L) *123.12mm (W) *250mm (H) build volume (10.1" 8K mono edition)
The purchase price does not include sales tax/VAT and shipping cost. The shipping cost will vary from country to country and depends on which shipping option chosen. Customer is responsible for sales tax/VAT of your location.
Accessories included:
1x extra nFEP film
1x USB stick
1x power adapter
1x metal scraper
1x plastic scraper
2x funnels
DOES NOT come with resin.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.
EPAX X156 LCD 3D Printer Lab Machine with 16" 8K Mono Screen Installed
This is a lab machine used to test the 16" 8K mono screen upgrade kits for X156 printers. Consider this as a refurbished unit but with latest 16" 8K mono screen installed. You can expect a few cosmetic imperfections on the body.
Printed for testing purpose and calibrated before shipping.
FREE USA SHIPPING - Please email to sales@epax3d.com to confirm current lead time before ordering
-
FEATURES:
-
8K high resolution of 7680x4320
-
353.28mm*198.72mm*400mm build volume
- Vat Volume -2.5kg
-
Package Size/Weight: 125 lb
Warning: It is recommended to have 2 people install/move the printer due to its weight.
Please keep the original boxes/packing materials
We do not ship refurbished/lab printers internationally. They are only available for domestic US customers.
* Resin NOT included, must be purchased separately.
This is an USED EPAX X156 printer with the latest 16" 8K mono screen installed in good working condition. The exact condition of the printer will vary. Sometimes a refurbished/lab printer will have minor cosmetic damage (such as a dent or scratch on the frame or scuffs). Some will have some signs of use (such as minor scratches on the build plate or vat), but nothing that will impacting printing.
The printer is in good working condition and is tested before being shipped out. Your printer will arrive calibrated and ready to print.
CUSTOMER SERVICE - When we say great customer service, we mean it. Responses to your e-mail inquiries should be sent within hours. Customer satisfaction is our No. 1 priority. EPAX also offers an amazing technical support team who will schedule a video call with you once you receive your printer to help you get the X156 up and running and answer any questions you may have. To schedule a setup video call please email support@epax3d.com
Warranty Information
Our refurbished/lab printers are backed by a 3-Month Warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, filter, and resin are consumable technology which are NOT covered by this warranty.
All other components of the printer are covered by the warranty. In the event of damage or defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. You must cover the round trip shipping costs. You must use the original boxes/packing materials. So please keep its original boxes and packing materials. You may use your preferred carrier.
Returns and Refunds
Keep all boxes and packing materials. If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us.
For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items.
As soon as you receive the printer, please contact support@epax3d.com to schedule a video conference meeting so that we can help you setup and go through key things.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.
Free shipping in the USA. Expect to receive within 7 to 10 days.
The DX Cure Pro is designed for dental applications. A very even distribution of curing light around with a turn table in the middle. It takes about 2 mins to cure dental models.
The DX Cure Pro is also a great device to cure miniatures.
Curing chamber size: 8x8x4 inches. Not designed to cure anything taller than 4 inches.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.
EPAX X160 LCD 3D Printer with 16" 8K Mono Screen installed -- Back Order
Built on top of our successful and long-lasting X156 printer, this X160 is an all-metal build Resin 3D Printer with the same huge printing volume.
It is equipped with latest 16" 8K mono screen and parallel light source for consistent prints.
Back Order. Orders will be shipped in December.
FREE USA SHIPPING - ALL ORDERS SHIP IN 1-3 BUSINESS DAYS FROM OUR North Carolina Office
-
FEATURES:
-
8K high resolution of 7680x4320
-
353.28mm*198.72mm*400mm build volume
- Vat Volume -2.5kg
-
-
- Parallel Light Source
Package Size/Weight: 125 lb
Warning: It is recommended to have 2 people install/move the printer due to its weight.
Please keep the original boxes/packing materials
* Resin NOT included, must be purchased separately.
CUSTOMER SERVICE - When we say great customer service, we mean it. Responses to your e-mail inquiries should be sent within hours. Customer satisfaction is our No. 1 priority. EPAX also offers an amazing technical support team who will schedule a video call with you once you receive your printer to help you get the X160 up and running and answer any questions you may have. To schedule a setup video call please email support@epax3d.com
Warranty Information
Our new printers are backed by a 1-year Warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, filter, and resin are consumable technology which are NOT covered by this warranty.
All other components of the printer are covered by the warranty. In the event of damage or defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. You must cover the round trip shipping costs. You must use the original boxes/packing materials. So please keep its original boxes and packing materials. You may use your preferred carrier.
Returns and Refunds
Keep all boxes and packing materials. If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us.
For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items.
As soon as you receive the printer, please contact support@epax3d.com to schedule a video conference meeting so that we can help you setup and go through key things.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.