EPAX X133 13.3" 7K Mono LCD 3D Printer
The EPAX X133 is equipped with a 13.3-inch 7K monochrome LCD screen now, allowing for much faster print times. The light source is a special parallel array for even light distribution across the build area. The X133-7K is equipped with a lensed parallel light source that provides un-paralleled dimensional accuracy by focusing the UV light for curing the resin. This leads to highly accurate prints and highly detailed prints. X133 is a robust business class printer.
Printer/Screen Specifications:
- Technology: LCD 405nm
- XY Resolution: was 6K now 7K (6480x3600)
- Build Volume (LxWxH): was 292 x 165 x 400mm now 298.08x165.6x400mm
- Printer Size (LxWxH): 457 x 381 x 787mm
- Weight: 52kg
Please choose X133-6K in ChiTuBox for the slicer settings and then change Resolution to 6480x3600 and Size to X:298.08 Y:165.6 Z:400mm. The X133-7K will be added to the next ChiTuBox release/update.
Resin Compatibility: Prefer to use EPAX Hard and EPAX Hard & Tough but you can use many other resins too.
Mono Screen Advantages:
- 7K resolution at 13.3 inch size, allowing for more detail and accuracy
- Monochrome screens lasts much much longer than color screens. With proper use, these screens can last 2000 hours.
- Monochrome screens allow for very short layer exposure times (about 1/4 of the time needed for color screens) for faster print times.
Below is a video that will introduce you to the EPAX X133.
Package Size/Weight: 115 lbs
Warning: It is recommended to install/move by 2 people due to its weight.
Please keep original boxes/foams.
Fully read and understand our Warranty, Return, and Refund Policies before purchasing a printer.
Returns and Refunds
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide free parts and labor, but you must cover the round trip shipping costs. You must use the original boxes/packing materials. So please keep its original boxes and materials. You may use your preferred carrier.
If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us.
For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items.
As soon as you receive the printer, please contact support@epax3d.com to schedule a video conference meeting so that we can help you setup and go through key things.
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.
