EPAX X10/E10 10.1" Magnetic Build Surface (For ALL-METAL Angled Build Platform)
This magnetic pad and steel plate are compatible with the X10 or E10 all-metal ANGLED build plate pictured below. It is attached to the existing build platform using an adhesive magnetic pad. This item does not come with the build platform itself. Not recommended for dental use.
This DOES NOT FIT the E10's standard Molded Platform or the rounded version 2 All-metal build plate pictured below.
You can choose the magnetic pad+steel plate or the steel plate by itself.
Two options to choose from:
1, Magnetic pad and Steel Plate
2, Steel Plate Only
Steps to apply:
1, Clean your existing Metal Build Platform well. Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.
2, Glue magnetic pad to the existing build platform. The pad comes with glue pre-applied.
3, Put the steel plate on.
4, Re-level the new whole Build Platform similar to before.
Size: 9.12" x 5.625" (231mm x 143mm)
Caution:
You can use IPA to clean the steel plate and magnetic pad surface. But not to soak the magnetic pad in IPA. Doing so will lead to the separation of the pad from the build platform since IPA can dissolve the glue.
This magnetic build plate comes ready to install on your build platform quickly. After applying the magnetic pad and steel plate to your existing build platform, you must relevel your build platform because of the increased height of the build surface. Failure to relevel/recalibrate your build platform could result in damage to other parts such as the LCD screen.
It is calibrated in the same way as the standard build platform. See the video below as a reference:
Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.
*Please carefully read and be sure you understand the following before purchasing a printer*:
Warranty Information
New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.
Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs. If you are outside USA, please consider purchasing from our distributors with warranty.
All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out.
Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.
If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.
Returns and Refunds
If for some reason you decide our printer and/or products are not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.
For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.
For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.
You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.
Walk-in Policy
For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off. It typically takes two business days to get the service/repair and final test done. More days may be needed if the parts are not in stock. Before the service, we will inspect and send you a quote including the parts cost and the labor cost.