EPAX E10 10.1" Magnetic Build Surface (For E10 Molded Build Platform and Version 2 Rounded All-Metal Build Platform)

This magnetic pad and steel plate are compatible with the E10 Version 2 All-Metal Rounded build plate or the original Molded build plate pictured below. It is attached to the existing build platform using an adhesive magnetic pad. This item does not come with the build platform itself. Not recommended for dental use.

This DOES NOT FIT the Angled Build Platform pictured below.

You can choose the magnetic pad+steel plate or the steel plate by itself.

Two options to choose from:

1, Magnetic pad and Steel Plate

2, Steel Plate Only

Steps to apply:

1, Clean your existing Metal Build Platform well.  Make sure no IPA is left on the existing build surface since IPA can dissolve the glue of the magnetic pad.

2, Glue magnetic pad to the existing build platform.  The pad comes with glue pre-applied.

3, Put the steel plate on.

4, Re-level the new whole Build Platform similar to before.

Size: 9.12" x 5.56" (231mm x 141mm)

Caution:

You can use IPA to clean steel plate and magnetic pad surface.  But not to soak the magnetic pad into IPA.  Doing that will lead to the separate of the pad from build platform since IPA can dissolve the glue. 

If you just want magnetic pad+steel plate, or just steel plate, please choose the right option below.  Note that these magnetic pad and steel plate are only compatible with E10/E10-5K LCD resin printer.  It fits well to the E10 series Molded Build Platform.

NOTE: Before printing with new build surface, be sure to calibrate it for your EPAX 3D printer. 

See the video below for how to level or re-level your build plate: