EPAX eSLIP/ACF Composite Film, ONE film, Choose your printer size

EPAX eSLIP/ACF Composite Film, ONE film, Choose your printer size

Regular price $35.00 Sale price $14.00
Shipping calculated at checkout.

E10/X10-8K Film Dimension:  290mmx210mm
X1-4KS Film Dimension: 180mmx130mm
  • X10 size fits for all EPAX X10/E10 printers
  • X1-4KS size fits for all EPAX X1 series printers.
  • Excellent slippery surface: enabling faster printing with less release force and less lifting distance.
  • Shipped in protective tube.  
  • Each pack contains one (1) film
  • 0.3mm thickness 

These films are composite films with a coating on one side to ensure great slippery.  Used in LCD, DLP and SLA machines where fast printing is more important than quality/durable parts.

Note:  The sides are directional.  Do not put it upside down.  See instructions on the film.  There is a protective film on the actual eSLIP film.  The protective film needs to be removed.

Difference between nFEP film and eSLIP/ACF film:

nFEP film is more elastic.  As such, it is less likely to be damaged by residues in vat.  It is recommended for all resin 3D printers, especially jewelry/dental applications where details and quality are more important.  nFEP film has great air permeability, which leads to less vacuum suction force.

eSLIP/ACF film is more rigid and slippery.  As such it needs a smaller lifting distance and prints can run faster.  Printers with eSLIP film can have an overall 40% speed gain due to lower lifting distance needed.  You also need to increase your bottom exposure time and normal exposure time by 20% because the film has 20% less light through rate.  It is recommended for all resin 3D printers where faster printing is more important than outstanding details.  However, if you leave residues in vat, the film is a bit easier to get damaged than nFEP film.  The coating, and the 0.3mm thickness, lead to a bit loss of light accuracy.  Fast printing resins, because they flow like water, are also not able to make strong and tough parts.  Parts tend to be more brittle.  As such, we don't offer fast printing resins.  You can use the film with normal resins and it can still speed up somewhat due to lower lifting distance alone.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.


Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.


Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.  


Customer Reviews

Based on 1 review Write a review