EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG

EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG

Regular price $39.99 Sale price $37.99
/
Shipping calculated at checkout.
Color

* We cannot ship resins internationally at this time. *

 

EPAX Water Washable Resin is water-soluble and can be cleaned up using room temperature tap water instead of isopropyl alcohol. It is low-odor in addition to avoiding the odor associated with IPA used in the clean-up of standard resins. This resin allows for faster printing speeds than most general purpose resins without sacrificing print quality.

Our Water Washable resin was designed specifically for capturing high-detail and is great for display pieces.  Oily looking right after printed but it is actually good looking after cured and dried.  It is also less easily get moisture impact, unlike other brand water washable resins which could get peeled off or cracked after weeks.   

It is compatible with most LCD printers that use 405nm wavelength UV light. 

 

* NOTE: the water used in post-processing and clean-up must be exposed to UV light before disposal and should not be poured directly down any drain. 

 

Recommended Resin Profiles for EPAX Printers

For mono screen printers, 0.05mm layer height, normal exposure time about 2s.

For color screen printers, 0.05mm layer height, normal exposure time about 8s.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

*Please carefully read and be sure you understand the following before purchasing a printer*:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, pre-cut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care, resin spills and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. Y ou must cover labor costs, the round trip shipping costs and any parts not under warranty. You may use your preferred carrier with proper shipping insurance coverage.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking / processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

 

Walk-in Policy

For local printer service/repair, please send an email to sales@epax3d.com to schedule an appointment for drop-off.   It typically takes two business days to get the service/repair and final test done.  More days may be needed if the parts are not in stock.  Before the service, we will inspect and send you a quote including the parts cost and the labor cost.