New products

EPAX X133 - UV LCD 3D Printer with 13.3" 4K mono screen installed
EPAX X133 - UV LCD 3D Printer with 13.3" 4K mono screen installed
EPAX X133 - UV LCD 3D Printer with 13.3" 4K mono screen installed
EPAX X133 - UV LCD 3D Printer with 13.3" 4K mono screen installed
EPAX X133 - UV LCD 3D Printer with 13.3" 4K mono screen installed
EPAX X133 - UV LCD 3D Printer with 13.3" 4K mono screen installed

EPAX X133 - UV LCD 3D Printer with 13.3" 4K mono screen installed

Regular price $3,299.00 Sale price $2,999.00
/
Shipping calculated at checkout.

In Stock.  Delivery time:  About 7 to 10 days via UPS ground after shipped.  

The EPAX X133 is equipped with a 13.3-inch 4K monochrome LCD screen, allowing for much faster print times. The light source is a special parallel array for even light distribution across the build area.

Printer/Screen Specifications:

Resin Compatibility: EPAX Hard and EPAX Hard & Tough

 

Mono Screen Advantages:

  • 4K resolution at 13.3 inch size, allowing for more detail and accuracy
  • Monochrome screens lasts much much longer than color screens.  With proper use, these screens can last 2000 hours.
  • Monochrome screens allow for very short layer exposure times (about 1/4 of the time needed for color screens) for faster print times.

 Below is a video that will introduce you to the EPAX X133.

 

Settings for ChiTuBox Slicer:


Resin Setting:

Package Size/Weight: 100 lbs

Warning:  It is recommended to install/move by 2 people due to its weight.

Please keep original boxes/foams.   

Fully read and understand our Warranty, Return, and Refund Policies before purchasing a printer.

 

Returns and Refunds

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide free parts and labor, but you must cover the round trip shipping costs. You must use the original boxes/packing materials.  So please keep its original boxes and materials.  You may use your preferred carrier.

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us.

For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items.

   

 

As soon as you receive the printer, please contact support@epax3d.com to schedule a video conference meeting so that we can help you setup and go through key things.

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart

EPAX X156 - 15.6" UV LCD 3D Printer

Regular price $2,799.00
/
Shipping calculated at checkout.

In stock 

EPAX 3D includes 2 free bottles of EPAX hard resin with every X156 order.  

The EPAX X156 is the largest LCD printer on the market, this all metal out of the box ready machine come with everything you need to start printing. Complete with a 345mm * 194mm * 400mm build volume this printer can print multiple large prints in a single shot & is specifically designed to incorporate future upgrades. This massive all metal 15.6 inch machine is extremely detailed and much faster than other leading brands it's size. If you are looking for a reliable 3D printer that will empower you in both manufacturing and prototyping than look no further than this industrial large format printer.  Engineered to be on 24/7 the X156 is resilient and reliable.

The X156 comes with a  15.6" 4K color LCD screen installed - this allows for maximum build volume and color screens are more affordable to replace over time. 

Printer Specifications:

Resin Compatibility: EPAX Hard and EPAX Hard & Tough

  • Vat Volume -2.5kg

Interchangeable with a 13.3-inch mono screen - with the necessary mounting brackets, the 13.3-inch 4K monochrome screen can be installed; mono screens last longer and allow for faster exposure times, but replacements are more costly. Current X133 mono specs are below. The X133 4k mono screen is interchangeable with the X156 screen. 

  • 293mm (L) 165mm (W) 400mm (H) build volume for 13.3" 4K mono
  • 3840 x 2160 resolution
  • Pixel precision: 76um

Package Size/Weight:  125 lb 

Warning:  It is recommended to install/move by 2 people due to its weight.

Please keep original boxes/packing materials




 

CUSTOMER SERVICE - When we say great customer service we mean it. Responses to your e-mail inquiries should be sent within hours. Customer satisfaction is our No. 1 priority.  EPAX also offers an amazing technical support team who will schedule a video call with you once you receive your printer to help you get the X156 up and running and answer any questions you may have. To schedule a video call setup please email support@epax3d.com


Fully read and understand our Warranty, Return, and Refund Policies before purchasing a printer.

 

Returns and Refunds

Keep all boxes and packing materials. If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. You must cover the return shipping back to the warehouse, but you will receive a full refund if the printer is unopened when returned to us.

For opened/used printers there is a 15% restocking fee and if any parts/accessories are missing you will not be refunded for those items. 

 

As soon as you receive the printer, please contact support@epax3d.com to schedule a video conference meeting so that we can help you setup and go through key things.

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart

EPAX Hard Resin, Specially Designed for large LCD 3D Printers, UV 405nm

Sale price $43.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

Original formula 

EPAX Hard Resin was specially formulated for large printers.  It is a very stable resin.  Due to more background light and longer printing time/size, the EPAX hard resin is specially formulated to withstand background light for long time and generate heat slowly and evenly.  By controlling sudden rising of hot spot, LCD screen can last longer.  The hard resin also produces less release force, making it ideal to print things large.  It is also less stress on prints during each layer release.

It is the ideal resin for everyday uses and is the recommended resin for our larger printers such as X10, X133 and X156.   It sure also works great with our X1 printers and any other LCD resin printers on market.

 

For Mono screens, the recommended settings are:

 For Color screens, the recommended settings are:

 

Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX General Purpose Rapid LCD Resin, UV 405nm
EPAX General Purpose Rapid LCD Resin, UV 405nm
EPAX General Purpose Rapid LCD Resin, UV 405nm

EPAX General Purpose Rapid LCD Resin, UV 405nm

Regular price $21.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

 

EPAX General Purpose Rapid LCD Resin in gray is the perfect resin for any standard 3D printing projects. The gray color is easy to prime and paint and is great unpainted for basic prototyping. When cured, this resin is sturdy and durable for functional pieces in addition to displays. This is an easy-to-use resin, excellent for beginners, compatible with printers that use 405 nm UV resins.

 

Recommended for:

EPAX E6 Printer

EPAX E10 Printer

EPAX X1 series Printers

EPAX X10 series Printers

 



Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX Hard and Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard and Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard and Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard and Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard and Tough Resin for LCD 3D Printers, UV 405nm
EPAX Hard and Tough Resin for LCD 3D Printers, UV 405nm

EPAX Hard and Tough Resin for LCD 3D Printers, UV 405nm

Regular price $41.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

  • ABS-like
  • Hard and Tough Resin, Compatible to most LCD printers using 405 nm wavelength light
  • Hardness 81 shore D, Low Shrinkage
  • Scratch resistance
  • Faster Printing Speed
  • Easy to print on all LCD printers

 

 

Benefits of EPAX Hard and Tough Resin

  • Solid, hard plastic after curing
  • low odor
  • minimal shrinkage (~3%)
  • easy clean-up with isopropyl alcohol

 

 



Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X10 build platform upgrade angled build plate
EPAX X10 Angled Build Platform
EPAX X10 beveled build platform
EPAX X10 beveled angled tapered build plate

EPAX X10 Angled Build Platform

Regular price $139.00
/
Only 2 left!
Shipping calculated at checkout.

This is an alternate, optional build platform for the EPAX X10 3D printer. It is made from soft aluminum with a sanded surface for the best adhesion and print removal, and it is constructed to be stable for minimal re-leveling.

This build platform is only compatible to X10 printers, not compatible to E10 printers.  E10 requires a different top bracket.

Angled X10 Build Platform Benefits

Using this build platform will minimize resin accumulation on the stop of the plate, allowing it to more readily drip back into the vat during printing. This makes clean-up and print removal faster, easier, and less messy overall so that you can spend more time printing.

 

This build plate comes with all of the parts necessary to install it quickly and easily into your printer. All that is necessary is to calibrate the plate to your machine. It is calibrated in the same way as the standard flat build plate. See the video below:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
z-axis motor and lead screw for EPAX X1 3D LCD resin printer replacement

Z-Axis Motor and Lead Screw

Regular price $70.00 Sale price $49.00
/
Only 4 left!
Shipping calculated at checkout.

This is a replacement Z-axis motor and lead screw for EPAX LCD resin printers. 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X10 3D Resin printer spare or replacement resin vat with nFEP film installed

EPAX X10 Aluminum Resin Tank with nFEP Film Installed

Regular price $149.00
/
Only 1 left!
Shipping calculated at checkout.

Our resin vats are made entirely of durable, machine-anodized aluminum. This vat will fit EPAX X10 3D printers. Each vat comes with a sheet of nFEP film already installed, so it will arrive ready to use. 

Features

  • The completely metal resin tank will not be harmed by resin nor the curing process. 
  • It is equipped with a rubber seal to ensure that the vat is water-tight to help avoid resin leaks.
  • The groove in the front right corner makes draining residual resin easy and fast.
  • Hash-marks on the back edge of the vat indicate resin levels.
  • Max Volume of 1250mL without build platform and 900mL with build platform.

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX Castable Resin for Jewelry, UV 405nm 0.5kg

EPAX Castable Resin for Jewelry, UV 405nm 0.5kg

Regular price $148.00 Sale price $129.00
/
Only 7 left!
Shipping calculated at checkout.
* We cannot ship resins internationally at this time. *

EPAX Jewelry Castable resin is the ideal resin for jewelers. It has a higher wax content to give a clean burnout for investment casting with no ash. Printed parts may also be used for detailed, accurate custom try-ons/prototyping. After a wash in isopropyl alcohol pieces are smooth with no tackiness and durable enough for handling with no additional curing needed. This resin is available in blue to highlight the most intricate details of rings, pendants, and other designs.

Color:  Blue or Green
 
Suggested Slicer Settings for color screen printers:
  • Normal Exposure Time: 16 seconds
  • Bottom Exposure Time: 80 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 30mm/s
  • Retraction Speed: 120mm/s

 

 


Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG
EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG
EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG
EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG

EPAX Water Washable Resin for LCD 3D Printers, UV 405nm 1KG

Regular price $43.99
/
Shipping calculated at checkout.

* We cannot ship resins internationally at this time. *

 

EPAX Water Washable Resin is water-soluble and can be cleaned up using room temperature tap water instead of isopropyl alcohol. It is low-odor in addition to avoiding the odor associated with IPA used in the clean-up of standard resins. This resin allows for faster printing speeds than most general purpose resins without sacrificing print quality.

Our Water Washable resin was designed specifically for capturing high-detail and is great for display pieces.  Oily looking right after printed but it is actually good looking after cured and dried.  It is also less easily get moisture impact, unlike other brand water washable resins which could get peeled off or cracked after weeks.   

It is compatible with most LCD printers that use 405nm wavelength UV light. 

 

* NOTE: the water used in post-processing and clean-up must be exposed to UV light before disposal and should not be poured directly down any drain. 

 

Recommended Resin Profiles for EPAX Printers

For mono screen printers, 0.05mm layer height, normal exposure time 1.5 to 2s.

For color screen printers, 0.05mm layer height, normal exposure time about 8s.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
Elastic Resin, Designed for LCD 3D Printers, UV 405nm, Clear, 1kg
Elastic Resin, Designed for LCD 3D Printers, UV 405nm, Clear, 1kg

Elastic Resin, Designed for LCD 3D Printers, UV 405nm, Clear, 1kg

Regular price $129.00
/
Shipping calculated at checkout.
Elastic  Resin, Color:  Clear
Slicer settings:
Normal Exposure Time: 8 seconds
Bottom Exposure Time: 50 to 60 seconds
Bottom Layers: 4
Layer Height: 0.05mm
Lift Speeds: 90mm/s
Retraction Speed: 150mm/s

 

 


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm
EPAX Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm

EPAX Dental Model UV Resin for Orthodontics, Designed for LCD 3D Printers, UV 405nm

Sale price $49.00
/
Shipping calculated at checkout.
* We cannot ship resins internationally at this time. *

EPAX Dental Model Resin for Orthodontics provides very minimal amount of shrinkage in a 3D printing resin. It is the recommended resin for dental and orthodontic applications.

With a shrinkage rate only around 2% it is capable of capturing a very high level of detail, making this resin ideal for the accurate modeling of teeth and gums for the production of retainers, night guards, and more. 

Color: Orange


Recommended Settings for EPAX Printers using Color Screen:

  • Normal Exposure Time: 8 seconds
  • Bottom Exposure Time: 50 to 60 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 60mm/s
  • Retraction Speed: 150mm/s
Recommended Settings for EPAX Printers using Mono Screen:

  • Normal Exposure Time: 2 to 2.5 seconds
  • Bottom Exposure Time: 25 seconds
  • Bottom Layers: 4
  • Layer Height: 0.05mm
  • Lift Speeds: 60mm/s
  • Retraction Speed: 150mm/s

 


Recommended Resin Settings on EPAX Printers 

Below are properties of some of our resins:

 

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X1 3D printer power supply brick and cord

EPAX Replacement Power Supply with USA Plug Style -- Choose Your Model

Regular price $59.00
/
Shipping calculated at checkout.

The power supply is a replacement power supply for your model, with USA plug style.  Please choose correct model first.

 

If you order from another country and require a different plug style, you can replace the cord. The cord detaches from the power brick.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X1 mainboard
EPAX X1 3D resin LCD printer motherboard

EPAX X1-Classic/ X1-N/ X1-K/ E6 Mainboards

Regular price $129.00
/
Shipping calculated at checkout.

The X1-N mainboard is a replacement mainboard for EPAX X1 LCD printers ONLY and uses SX04 interface to the LCD screen. Use with other similar printers is not supported. This is the mainboard only and does include any cables, connectors or other components.

You will need to check which version X1 you have. X1-Classic X1-N, X1-K, and E6 will all use this mainboard but will use different firmware. The X1 mainboard uses an SX04 interface to the LCD screen and its firmware uses CTB file format to print instead of the CBDDLP file format that the older X1-Classic mainboards used. Because of where the screen cable connector is located, customers replacing the X1-classic mainboards will need to remove the right angle adapter from the end of their screen cable before connecting to the mainboard. FAILURE TO DO SO WILL SHORT OUT THE MAINBOARD AND THE SCREEN.

Please contact support@epax3d.com if you have any questions.


Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX X1 parallel light upgrade mod kit for 3d printing
all parts included in EPAX X1 parallel light array upgrade light source modification mod kit

Parallel Matrix UV Light Mod Kit for EPAX X1/X1-N/X1-K

Regular price $135.00 Sale price $119.00
/
Shipping calculated at checkout.

This is a light upgrade/mod kit for the EPAX X1 series only (X1-Classic, X1-N, X1-K). This parallel matrix UV light kit has all the parts and screws necessary to change your existing, standard X1 light source to this newer light source that adds more dimensional accuracy and can capture the finer details of your prints- great for dental and jewelry applications.

The latest edition of this light source now functions at a lower energy level - about 30W. It is tuned to have exact same exposure time as the standard light source, but it will help to prolong the lifespan of your LCD screen.
Kit includes a parallel light, a fan, a drive and the bracket of drive, a pair of mounting brackets for the light,  a bracket for mainboard and screws.

The standard screw sizes (mm), quantities and picture should be as below :

M4x5 (4 pcs)
M3x8 (6 pcs)
M3x5 (8 pcs)
M3x6 (2 pcs)
M4x20 (2 pcs)
White rubber gasket ( 2 pcs)
You might be able to use some existing screws from old light source too.
 
Warranty:  This mod kit has 3 month warranty.

Video Instructions:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
nFEP nonFEP film for EPAX X133 LCD 3D resin printer

EPAX nFEP Premium Film for EPAX X133, ONE film

Regular price $39.00
/
Shipping calculated at checkout.


Our Non-FEP (nFEP) films are a special blend of Teflon material, superior to standard FEP films and ideal for large-format printers when you will truly be able to recognize the benefits.

This package of film includes ONE (1) piece of nFEP film sized for the EPAX X133 13.3" LCD 3D printer with 0.125mm thickness.

  • nFEP is excellent quality: resistant to high temperatures (up to 260° C), chemically resistant, UV stable and providing the ultimate non-stick surface
  • It is perfectly smooth - smoother than FEP films - with optimal air permeability, which leads to less vacuum suction force for fewer failed prints due to layers sticking to the film
  • Each package is shipped in thoughtful protective packaging.

Films are Made in Japan, Cut and Packed in China

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
pre-cut screen black screen tape for EPAX X1 LCD 3D resin printer
screen tape to protect LCD screen of EPAX X1 LCD 3D resin printer

EPAX X1/E6 Series Screen Pre-cut Tape

Regular price $2.99
/
Shipping calculated at checkout.

Please choose the right size for your printer!.

This tape should be installed on top of your LCD screen to help protect your printer from resin spills as well as hold your LCD screen in place. It will prevent any leaked resin from dripping underneath your screen and potentially damaging your printer. It will also hold your screen in place if you have to lay your printer down to perform maintenance, etc.

The 5.5" variant is cut and sized to fit EPAX X1 and X1-DJ printers. It is ready to install.

The 6" variant is cut and sized to fit EPAX X1K 6" printer and E6 printer. It is ready to install.

This is the screen tape ONLY. Replacement LCD screens must be purchased separately.

One way to apply tape to 5.5" LCD screen:

  1. Wear UV protective glasses.  Download the 5.5" screen-edge.cbddlp file which will show you the edge of displayable screen. You can find the frame file here.
  2. Remove both vat and build platform. "Print" the above cbddlp file and observe the light on each side of the display area.
  3. Apply the pre-cut tape to the light frame so that the light frame is still seen.  On each of the 4 sides there is about 1mm room of extra space so you don't necessarily need to apply the tape precisely.  The tape is 2mm larger than the display area on all sides.
  4. Press the tape so that it is secure and even. Try to avoid creases.
  5. Perform an Auto-Home without the vat in place and then with the vat.

Another way to apply tape:

  1. Wear UV protective glasses
  2. Remove both vat and build platform. Select "Calibrate" on touchscreen.  Use a thick cardboard to cover the displayed rectangle.
  3. Apply the pre-cut tape to the lighted area along the lighted edge.  
  4. Press the tape so that it is secure and even. Try to avoid creases.
  5. Perform an Auto-Home without the vat in place and then with the vat.

 

See the video below for installation:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
TFT color touchscreen
3.5" TFT color touchscreen

EPAX 3.5 Inch Color TFT Touchscreen For X1, E6, X10 & E10

Regular price $39.00
/
Only 4 left!
Shipping calculated at checkout.

As pictured. This is the touchscreen ONLY. The ribbon cable is not included. 

The 3.5" color TFT touchscreen is compatible with EPAX printer models including X1 series, E6, E10 series and X10 series. It comes covered with a protective film and is ready to install.

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
X1 aluminum build platform
EPAX X1 replacement build plate
EPAX X1 Build Platform

EPAX X1 Build Platform

Regular price $69.00
/
Shipping calculated at checkout.

Our soft aluminum EPAX X1 build plates allow for both optimal bottom layer adhesion as well as print removal. They have a gently sanded surface and are constructed to be stable, secure and seldom require re-leveling.

This build platform has all the parts/screws necessary to install it right away.  

If you choose a "Slightly Scratched" build platform you may see some signs of use when your platform arrives. They were likely scratched during factory testing. These scratches will not affect print adhesion or printing in any way. Scratches are actually known to improve adhesion and platforms inevitably become scratches over time.

Works with all EPAX X1 series printers. 

NOTE: Before using your new build platform, be sure to calibrate it for your EPAX 3D printer. 

See the video below for how to level or re-level your build plate:

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
aluminum resin vat resin tank for EPAX X1 LCD 3d printer with nFEP film installed

EPAX X1 Aluminum Resin Tank With nFEP Film Installed

Regular price $79.00
/
Only 4 left!
Shipping calculated at checkout.

Made entirely of durable anodized aluminum and with a sheet of nFEP film already installed, this EPAX X1 resin vat will arrive ready to use. 

Features

  • The completely metal resin tank will not be harmed by resin nor the curing process. 
  • It is equipped with a rubber seal to ensure that the vat is water-tight.
  • The groove in the front right corner makes draining unused resin easy and fast.
  • Hash-marks on the back edge of the vat indicate resin levels.
  • Max Volume is 450mL without build platform and 300mL with build platform.



Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart
EPAX nFEP Premium Film for 5.5" & 6" LCD/DLP/SLA 3D Printers (3 Pack)
EPAX nFEP Premium Film for 5.5" & 6" LCD/DLP/SLA 3D Printers (3 Pack)
EPAX nFEP Premium Film for 5.5" & 6" LCD/DLP/SLA 3D Printers (3 Pack)
EPAX nFEP Premium Film for 5.5" & 6" LCD/DLP/SLA 3D Printers (3 Pack)

EPAX nFEP Premium Film for 5.5" & 6" LCD/DLP/SLA 3D Printers (3 Pack)

Regular price $23.99
/
Shipping calculated at checkout.
Our nFEP films are a special blend of Teflon material.  They were originally used in DLP and SLA machines (a different size) due to high requirements of those printers.  Those FEP films sold by other brand LCD printers are not good enough for DLP and SLA. nFEP film is now available for LCD printers.
  • This 3-pack of films are fit for all EPAX X1 series 3D Printers, including X1-Classic, X1-DJ, X1-N, X1-K and also E6 printers, because they all share the same size of vat.
    • Size: LxW 200x140mm/7.8x5.5 inch
    • New 0.125mm thickness, compared to previous 0.1mm thickness
  • Our nFEP films are excellent quality: resistant to high temperatures (up to 220° C), chemical resistant, UV stable and provide the ultimate non-stick surface for 3D resin printing.
  • nFEP is perfectly smooth - smoother than FEP film - with great air permeability, which leads to less vacuum suction force. So you will have fewer failed prints compared to standard FEP film.
  • All of our films are shipped in thoughtful, protective packaging to ensure they arrive to you in pristine condition.
  • Each pack contains three (3) films

Films are Made in Japan, Cut and Packed in China

Here at EPAX 3D, we genuinely want you to be completely satisfied and enjoy your EPAX printer. We stand behind our printers and if something goes wrong, we are here to help.

Please carefully read and be sure you understand the following before purchasing a printer:

Warranty Information

New printers have a 1-year warranty that begins from the date you receive your printer. Our refurbished printers are backed by a 3-month warranty that begins from the date you receive your printer.

Please note: The LCD screen, film, precut tape, filters and resin are consumable technology which are NOT covered by this warranty. The warranty is also NOT valid for international (non-USA) orders due to high shipping costs.   If you are outside USA, please consider purchasing from our distributors with warranty.

All other components of the printer are covered by the warranty. In the event of defect, we will ship you replacement parts free of charge. It does not void the warranty for you to open your printer and perform maintenance. Our printers were designed to be user-friendly both inside and out. 

Warranty does not cover willful damages, tears and damages due to accident, normal wear and tear, improper care and mis-use.

If you wish to have us repair or perform maintenance on your printer for you, we are happy to do so. We will provide parts and labor, but you must cover the round trip shipping costs and any parts not under warranty. You may use your preferred carrier.

 

Returns and Refunds

If for some reason you decide our printer is not for you, simply contact us within 30 days from the date of your purchase. Return shipping must be covered by the customer. We can print a label for you, however the cost of the label will be deducted from the refund.

For unopened products, a 5% processing fee will be deducted from your refund to help cover a portion of our transaction and shipping costs.

For opened/used products there is a 15% restocking/processing fee and if any parts/accessories are missing, the cost for those items will be deducted as well. Customer is responsible for ensuring a clean product is shipped back to us. Products that are shipped in poor condition (e.g. resin on a printer or still on the vat/platform) will have an additional 5% deducted from their refund.

You may opt to receive your refund in the form of store credit. In the case of unopened products the 5% processing fee will not be applied. In the case of opened products the 15% restocking/processing fee will still be applied. Refunds are only given out once one of our technicians finishes inspection on the product.

Cart